Wirenco 2/0, 19-Stranded THHN Yellow Copper Building Wire (100Ft Cut)

Applications:Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). Type THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type MTW conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations.Features:Nylon outer jacket for easy pulling. VW-1 rated 14 AWG - 8 AWG. All sizes are rated gasoline and oil-resistant II.Standards: - Underwriters Laboratories Standards UL-83, UL-1063, UL-758 - AWM Spec 1316, 1317, 1318, 1319, 1320, 1321 - ASTM Stranding Class B3, B8, B787 - Federal Specification A-A-59544 - Canadian Standards Association C22.2 No. 75 - NEMA WC70/ICEA S-95-658 - Institute of Electrical and Electronics EngineersSpecifications:Size: 2/0Number of Strands: 19Cross Section Area (mm2): 67.40PVC Insulation Thickness (Conductor): 1.270 mm / 0.050 inchesNylon Jacket Thickness: 0.180 mm / 0.007 inchesOutside Diameter: 13.16 mm / 0.518 inchesWeight: 0.488 lbs per ftAllowable Ampacity: 145 Amps at 60ºC / 175 Amps at 75ºC / 195 Amps at 90ºC

• Nylon Outer Jacket for Easy Pulling
• Rated Gasoline and Oil-Resistant
• Tough, polyamide, Nylon outer covering
• Underwriters Laboratories Standards UL-83, UL-1063, UL-758
• For use in wet or dry locations at temperatures not to exceed 90°C