Wet Polisher 3/16" Half Bullnose Roundover Bullnose Router Bit Masonry profiling grinding wheel 10 Diamond polishing pad for granite marble glass concrete contertop edge vanity top edge tile edge

This package carries (a)-(c). please read carefully before you buy: (a) 1 Piece of Fixed Speed (5000RPM) Wet Polisher (420W, 110V, 5/8" Spindle. with very simple water feed design, designed for users who don't want to spend too much on wet polishing job). This polisher has no GFCI circuit breaker, our advice is plug this into a GFCI normally located in bathrooms and kitchens and using a extension cord from there. It is 5000RPM. 5000RPM is especially designed designed for granite marble concrete polishing. Buyers please note that high speed grinder (like 7500, 11000RPM) are NOT appropriate for polishing since they burns the polishing pad and breaks the pad holder. The hose connector can simply and easily connect to garden hose. Low RPM make this polisher very good for polishing, but it is not very powerful. Please use it softly. (b) 9 Pieces of 4" Diamond Polishing Pad for concrete marble granite and 1 backer/pad holder. The 9 pads are: 2 X Grit 50, 1 X Grit 100 200 400 800 1500 3000 10000. (c) 1 Piece of B5 (3/16" / 5 mm) for 5 mm / 3/16 Inch high / thick granite marble concrete quartz glass countertop / vanit top edge bullnosing Diamond Brazed Router Bit to do radius / half / roundover bullnose. The inner hole of this router bit is 7/8" to 58". it works with the polisher, since all our wet polisher had the lock ring nut pair to use 7/8" or 5/8" non threaded diamond tools.

• (a) 1 Piece of Fixed Speed (5000RPM) Wet Polisher (420W, 110V, 5/8" Spindle. with very simple water feed design, designed for users who don't want to spend too much on wet polishing job). This polisher has no GFCI circuit breaker, our advice is plug this into a GFCI normally located in bathrooms and kitchens and using a extension cord from there. It is 5000RPM. 5000RPM is especially designed designed for granite marble concrete polishing. Buyers please note that high speed grinder
• (like 7500, 11000RPM) are NOT appropriate for polishing since they burns the polishing pad and breaks the pad holder. The hose connector can simply and easily connect to garden hose. Low RPM make this polisher very good for polishing, but it is not very powerful. Please use it softly.
• (b) 9 Pieces of 4" Diamond Polishing Pad for concrete marble granite and 1 backer/pad holder. The 9 pads are: 2 X Grit 50, 1 X Grit 100 200 400 800 1500 3000 10000.
• (c) 1 Piece of B5 (3/16" / 5 mm) for 5 mm / 3/16 Inch high / thick granite marble concrete quartz glass countertop / vanit top edge bullnosing Diamond Brazed Router Bit to do radius / half / roundover bullnose.
• The inner hole of this router bit is 7/8" to 58". it works with the polisher, since all our wet polisher had the lock ring nut pair to use 7/8" or 5/8" non threaded diamond tools.