Vibra-TITE 730 Red Solvent Resistant Flexible Gasket Maker, 300ml Cartridge

Vibra-TITE 730 Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. 730 Gasket Maker provides an instant low pressure seal. 730 Gasket Maker seals joints between rigid metal faces and flanges such as valve covers and gearbox casings. This product can be used with or without pre-cut, pre-formed gaskets. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto parts. Fixture Speed with Activator is <15 minutes. Fixture Speed without Activator is 1 hour. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. 900-1500 psi shear strength. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. Suitable for aluminum, iron and steel rigid machined flanges. Unprimed 0.010 inches; Primed 0.020 inches Maximum gap fill. 1.13 Specific gravity. Unprimed 1-12 hours; Primed 15 minutes - 2 hours Cure Speed. N Suggested primer. 300 ml Cartridge.

• Alleviates the need for preformed gaskets
• Remains liquid when exposed to air
• Cures when confined between mating flanges
• Prevents corrosion and galling of threads
• Can fill gaps as large as 0.050