Vibra-TITE - 13725 137 Permanent High Temperature and High Strength Anaerobic Threadlocker, 250 ml Bottle, Red

Vibra-TITE 137 High Temp-High Strength Threadlocker is a red single component anaerobic threadlocker. 137 joins threaded parts exposed to operating temperatures up to 450 degree F. It offers excellent performance at temperatures more the 150 degree higher than other threaded locking products because of its enhanced chemistry. Applications include high temperature locking and sealing of studs, nuts, screws, bolts, and fittings. Parts are locked and sealed against leakage, contamination and corrosion. The higher viscosity is more suitable for large diameter, coarse threaded parts. It is recommended for parts that do not require routine maintenance as disassembly is difficult and may require heat. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto threaded parts. Fixture Speed with Primer is <5 seconds. Fixture Speed without Primer is 30 minutes at 77 degree F. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. 150-250 inches/lbs Typical Breakaway Strength. 50-150 inches/lbs Typical Prevailing Strength. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4degree C. Suitable for applications where disassembly is not required. Permanently locks nuts or bolts up to 1-1/2'' in diameter. Heat and hand tools required for disassembly. 0.007 inches Maximum gap fill. 300/250 lbs Torque strength, Break/Prevail. 1.11 Specific gravity. N or T Suggested primer. 250 ml Bottle.

• Lock and seal threaded fasteners
• Stop fasteners from loosening from shock and vibration
• Performs better than lock washers, bevel washers and other forms of mechanical locking devices
• Alleviates rust-lock
• Prevent leakage