Veneer Stone Rubber Molds for Concrete, Old World Brick Pavers, 2-Brick Mold at 9L*4W*3D inches Each, Recycled Material 12*12*4 inches

You can create your own custom Old World style weathered brick pavers with Stone Master's 2-brick mold. The rubber mold itself is 12x12x4", weighs approximately 11.5 lbs, and will produce 2 bricks at approximately 9x4x3". No need to use release agent, so easy clean up. This professional quality mold will last you for hundreds of pours! Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer’s instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives… NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.

• Create your own concrete Old World look weathered brick pavers for patios, driveways, walkways, edging, etc., 2 bricks per mold
• No release agent required, which saves money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic molds, urethane molds, and silicone molds
• Production quality molds can be used hundreds of times
• Made in the USA, both materials and labor
• At 3" thick, the bricks created from this mold can be used as driveway pavers