uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 680mm Expand Long 34 x 6 x 0.65mm 1 Pcs

Description:1.The drill press quill return spring is a good replacement for many existing quill spring drill presses, this spring will return the quill to the top after you have completed drilling and used to all kinds of vacuum cleaner coil springs, volume tube coil springs, and so on.2. Chemical Blackening, the product's performance forms an oxide film, divide the air, and prevents rust.3. Pay attention when installing springs. Do not loosen the wire of the fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out. Specification:Material : Spring SteelFinish : Chemical BlackeningMaterial Thickness : 0.65mmMaterial Width : 6mm/0.24inchSpring OD : 34mm/1.34inchExpand Length (about) : 680mm/26.77inchInner Mounting Type : Cylindrical BoreOuter Mounting Type : RingPackage Content :1 x Drill Press Spring

• Material Thickness : 0.65mm; Material Width : 6mm/0.24inch; Spring OD : 34mm/1.34inch; Expand Length (about) : 680mm/26.77inch
• Inner Mounting Type : Hole; Outer Mounting Type : Circle，Pack with 1 x Drill Press Spring
• ☆ The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
• ☆ Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
• ☆ Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.