Tropica CO2 System Bio & Bio-Refill Pack

Watch how to use CO2 System Bio

Watch how to add new Activator to recharge/refill your CO2 system Bio

CO2 is the most important nutrient for plants. Without a CO2 supply, the plants will not thrive. CO2 System Bio is a simple solution that adds extra CO2 to the plants in the aquarium. We recommend 20-25 °C for the best use of the product.

• For improved growth of easy and medium plants
• 60 days CO2 for a low cost
• Safe to use
• Easy to refill and recycle

How to use the product,

Part 1,

• Pour 300 ml of hot water in the bottle. Approx. 50 °C.
• Put on the cap (without air nozzle) and shake the bottle vigorously for one minute, or until the contents are thoroughly mixed.
• Then leave the bottle at room temperature for a minimum of 24 hours until the content has turned into a solid mass.
• At the same time, soak the CO2 Diffuser in clean water

Part 2 - 24 hours later,

• Add 1 portion of Activator in 200 ml of lukewarm water. Max. 35 °C.
• Leave for 5 minutes and stir until Activator is dissolved in the water.
• Add the solution to the bottle.
• Insert the gasket into the air cap and place the cap on the bottle.
• Attach the air hose to the bottle and connect the bottle to the CO2 Diffuser.
• Place the CO2 Diffuser in the aquarium.
• Wait for CO2 production to start. This usually takes a few hours, depending on the temperature.