TOGU TG-R3030 Heavy Duty Commercial Grade 300mm/12 inches Square/Rectangle Shape Solid 1.2mm Thick Stainless Steel 304 Push Pull Door Handle, Satin Gold Finish

Brand: TOGU Handle Material: 1.2mm Wall Thickness Commercial Grade-304 Stainless Steel Mounting Standoffs and Threaded Fastener Bolts Material: 100% Solid German Standard Commercial Grade-304 which will result in a very long durability and usage. Finish: Satin Gold Total length: 300mm / 11.811 inches Cross-Section Specification: 30X30mm or 1.18X1.18inches (FrontXSide) Center-to-Center Mounting Distance: 270mm/10.630 inches Attention: If you are purchasing new handles for the replacement of the old ones, the allowable tolerance for existing hole to hole distance is 270mm/10.630 inches(+/-)1mm/0.04inches. Door Type: Mountable on all types of doors including but not limited to glass and wooden doors, works up to 70mm/2.756 inches door thickness. Note: Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required. Steps for Installation: Drill and create two end to end holes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance. Use the Hexagonal Allen wrench to lose the hex socket set screws in the top and bottom pull connection base, remove apart the inner side and outer side of the door pulls. Put the inner side pull handle and outer side pull handle aligning at each other and tighten the 4 pieces of the hex socket set screws in the top and bottom pull connection base. This completes the installation process.

• Finished in perfect satin gold with chamfered edges to avoid any unexpected accidental injury, TOGU TG-R3030 12"/300mm size provides a Grip/Handle length of 300mm/11.811 inches, hole to hole distance 270mm/10.630 inches, Cross-Section Specification 30X30mm or 1.18X1.18inches (FrontXSide), with a pair of 95mm/3.74" backup stainless steel 304 threaded bolts to fit most doors up to 70mm/2.756" thickness.
• Quality 1.2mm Wall thickness, high-endurance grade-304 stainless steel Handle Grip, Solid grade-304 Stainless Steel mounting standoffs offer a 4.6mm/0.18" efficient deepest engagement length with 4 SUS304 hexagon socket set screws. TOGU TG-R3030 series SUS 304 push pull handles feature a distinctive and durable structure with strong resistance to rust, corrosion, and deformation for an everlasting lifespan without looseness.
• The accessory pack with a clear instruction manual are offered in the package to finish the whole installation effortlessly. If you need the long threaded bolts for your door up to 70mm/2.756", please send us a message. We will send you the matching accessory kit for free.
• Each purchase of TOGU push/pull handles comes as a PAIR of door pulls for the inside and outside of a single door. If you want to install back-to-back handles for double doors, 2 pairs are required.
• With a commercial comfortable hand feeling and elegant, clean design, TOGU TG-R3030 door handles can be used as Entry/Entrance door handles, wood or glass door pulls, interior/exterior entrance/entry door pull handles, and barn sliding door knobs/handles to coordinate all modern decorations.