tesa KLAAM Bathroom Robe Hook, Chromed Metal, self-Adhesive, Adhesive mounting Technology, 61mm x 96mm x 47mm

tesa Klaam bathroom robe hook - self-adhesive, chrome-plated metal, angular style As reliable as drilling and screwing in accessories is, as unwanted are the inevitable results: cracked tiles and drill holes. These can be avoided, though, with the tesa Power.Kit adhesive technology. No drilling is involved, and so walls and tiles remain untouched. The adhesive dries in 12 hours. After that, the tesa Klaam double hook is reliably mounted. * All that is needed for attachment is included, no other tools are required. * You can quickly remove the hook without a trace whenever you choose. * Equally, you can simply shift it to a different location with a new adapter BK20. * The tesa Power.Kit technology is “made in Germany,” guaranteeing endurance and reliability. The metal body has a high gloss chrome finish that is waterproof and stainless. It highlights the beautiful angular design of the hook that enhances any bathroom. Simple application1. Clean the surface with a cloth with pure alcohol and let it dry. Any remaining dust or grease can diminish the adhesive strength. 2. Remove the protective film from the adapter. Put it on to the wall. 3. Fill the adhesive into the larger hole until it starts showing up in the smaller hole. 4. Allow 12 hours of drying time. Attach the holder to the adapter with the provided Allen key. The hook can be taken off at any time. Detach the accessory from the adapter, then use pliers to twist the adapter off the wall. You can scrape off any left-over residue. With the tesa Klaam bathroom robe hook, the many benefits of the tesa Power.Kit adhesive technology can be yours. Warning. Hazardous respirable dust may be formed when used. Do not breathe dust.

• Attached with adhesive: The patented tesa Power.Kit technology is the all-in-one adhesive solution with which the tesa KLAAM bathroom robe hook is easily and reliably mounted.
• Glossy beauty: The attractive design is emphasized by the high gloss chrome plating on the metal body. It is also stainless and waterproof.
• No worrying about damage: Drilling is not involved, thus avoiding any damage to walls or tiles. The hook can be taken down at any time, not even leaving a trace of adhesive behind.
• Convenient application: Everything required for mounting is included, no further tools are needed. Clean the surface with pure alcohol or water. Position the adapter on the wall. Fill the adhesive into the adapter until it appears in the smaller hole. Allow 12 hours of drying time. Fasten the accessory to the adapter. Moving the hook to a different position is effortless with a new adapter BK20.
• Sticks to many surfaces: Suited for tiles, metal, natural stone, marble, concrete, wood, glass and various types of plastic. Not suited for wall paper, stucco and other surfaces with non-stick coating.