Stormer Viscometer Viscosity Meter Tester Digital rotational viscometer Rotary visometer with LCD Large Screen KU Unit 40.2 to 141.0KU Accuracy 1.5% for Paint Viscosity Testing

STM-IV B stomo viscometer specification One. Summary The stom viscometer is used for the determination of paint and other KU indicating the viscosity of the coating. The instrument can display the KU value of the measured sample viscosity or the load value associated with the KU value (unit: G). Two. Specification 1. measurement range: 40.2 ~ 141.0KU (KU value), 27cP-5250cP 32 ~ 1099g (load value); 2. measurement accuracy: 1.50% of full range; 3. measurement repeatability: the full range of 1.50%; 4. the rotational speed of the mixing axis: 200r/min + 1r/min; 5. container capacity: About 500ml; 6. input voltage: 220V 50Hz; 7. power: 10W; 8. shape size: 210mm x 180mm x 500mm (long * width *); 9. weight: 10kg. Three. Experimental environment 1. the instrument should be placed on a strong and smooth surface away from strong airflow, strong magnetic field, strong electric field and strong electric pulse interference. 2. in order to ensure the safety of the operator, the power outlet in the laboratory should be grounded reliably. 3. the temperature in the laboratory should be 23 C + 2 C, and the relative humidity should be less than 75%. 4. sample should be 23 + 0.2 C. Four. Operation and use 1. remove the instrument from the packaging box and put it on the worktable. 2. remove the stirring blade from the packing box, insert it into the sleeve of the rotating shaft, and fix it with the top tightening screw. 3. plug in the power plug, open the power switch on the back, the system starts to self check, the system will enter the standby state after the completion of the self test, and the display will display "-". 4. put the tested sample in the container which the instrument comes from, the liquid level is about 10mm from the container port.

• ★Summary---The instrument is controlled by a computer. The blade of a stirred blade (also called a rotor) is driven by a constant speed motor at a speed of 200r/min. The resistance moment of the impeller in the measured sample is converted by a computer to the KU value. unit (KU) is a logarithmic function of the load required to produce 200r/min speed, which is generally used to represent the speed of the 200r/min. It is used for the viscosity of the brush and roll.
• ★The main technical parameters---1. measurement range: 40.2 ~ 141.0KU (KU value), 27cP-5250cP 32 ~ 1099g (load value); 2. measurement accuracy: 1.50% of full range; 3. measurement repeatability: the full range of 1.50%; 4. the rotational speed of the mixing axis: 200r/min + 1r/min; 5. container capacity: About 500ml; 6. input voltage: 220V 50Hz; 7. power: 10W; 8. shape size: 210mm x 180mm x 500mm (long * width *); 9. weight: 10kg.
• ★Experimental environment---1. the instrument should be placed on a strong and smooth surface away from strong airflow, strong magnetic field, strong electric field and strong electric pulse interference. 2. in order to ensure the safety of the operator, the power outlet in the laboratory should be grounded reliably. 3. the temperature in the laboratory should be 23 C + 2 C, and the relative humidity should be less than 75%. The temperature of the 4. sample should be 23 + 0.2 C.
• ★Operation---1. remove the instrument from the packaging box and put it on the worktable. 2. remove the stirring blade from the packing box, insert it into the sleeve of the rotating shaft, and fix it with the top tightening screw. 3. plug in the power plug, open the power switch on the back, the system starts to self check, the system will enter the standby state after the completion of the self test, and the display will display "-". 4. put the tested sample in the container
• ★Use---5. put the container on the container seat on the container to be tested and select the unit of measurement ("KU") to indicate the KU value of the sample to be tested, and "GM" to indicate the load value. Press down the lifting handle, immerse the stirring blade into the sample to be tested, and the marking line on the blade axis of the impeller is aligned with the liquid level, and the instrument automatically starts running. 6. After a few seconds, the monitor displays the viscosity