Spec Black- Plastisol Ink, (Gallon)

Spec Black is our intermediate black that contains a soft creamy body, though not as creamy as our Black Cream. This black is very popular with manual and automatic printers. Modifications: , puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907). To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&SBase (I10-1020) Squeegee Hardness & Angle: Medium to hard at a 45 degree angle. Flashing: º 700 F for 8 seconds, just enough so the surface is tack free. Squeegee Blade: Sharp. ° Fusion/Curing: º º decreased. For heat presses use 390 F/195 C for 8 seconds. º º 325 F/160 C for 1 to 1 ½ minutes. Oven temp Wash-up: Any plastisol cleaner. Special Notes: a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed. Mesh: 86-300 Stencil: Any direct emulsion or capillary film. KEEP OUT OF SUNLIGHT

• Smooth Body
• Quick Flashing
• Vibrant
• High opacity for coverage
• No Bleed Resistance