SOB Rescue Figure 8 Descender Belaying Belay Device Rock Climbing Rappelling Gear Aluminum Magnesium Alloy for Climbing,High Rescue,Mountaineering

igure 8 descender uses the friction force generated between itself and the rope to brake, which can effectively slow down the descent speed and avoid some accidents due to too fast descent. Different winding methods correspond to different scenes.

• 【Excellent Braking Effect】 Figure 8 descender uses the friction force generated between itself and the rope to brake, which can effectively slow down the descent speed and avoid some accidents due to too fast descent. Different winding methods correspond to different scenes.
• 【Bent Ear Upgrade】 After optimization on the basis of the traditional rescue figure 8, it can be fixed at a certain height during high-altitude operations, and the rope can be passed through the middle ring and wound on the bent ear, which can achieve the effect of hanging in the air.
• 【More Effective Use】 8-13mm diameter single rope / double rope can be used, the small hole can be used as a protective plate when the auxiliary rope is lifted and transported, and the bent ear part can more effectively control the descent speed when two people are rescued. Can be used as a rope stopping point for aerial stop.
• 【High Strength Quality】 Made of aluminum-magnesium alloy material, forging process, breaking load 40KN (8818lb), middle thickening design, with high-strength torsion resistance, more durable, oxidation-resistant and prolonged service life. Size: 6.7inch(17cm)x6.7inch(17cm); Weight: 284g / 10oz, Large hole diameter: 2.17inch(5.5cm) Small hole diameter: 1.54inch(3.9cm)
• 【Scope of Application】 The descent protector can be used for climbing, rappelling, mountaineering, rock climbing, rescue, high-altitude operations and other scenarios. It is lightweight, convenient and easy to use, and can protect your safety in more areas.