RCO210 3 in 1 Hard Start Capacitor Replacement Part, Solid State Relay Overload & Start Capacitor Combination 1/12 hp- 1/2 hp Compressors Voltage 120VAC

Specifications: ●Replacement for model No. RCO210 ●Applications One size for all compressors from 1/12 hp through 1/2 hp. ●Maximum RLA 13.3 Amps ●Mounting: Quick Connect HP RATING - 1/2 ●Solid-state Hard-start Relay, includes relay, overload, and start capacitor. ●Provides a boost for hard start and unbalanced systems ●Prevents low voltage starting problems ●No additional wires required ●Used For domestic and commercial refrigeration systems and freezers Installation Instructions 1. Disconnect power supply. 2. Remove old relay and overload. 3. Push terminal connected to white wire on RCO onto start terminal of compessor. 4. Push terminal connected to red wire on RCO onto run terminal of compressor. 5. Push terminal connected to black wore on RCO onto common terminal of compressor. 6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut. 7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut. Note: Any use of the brand name or model designation for this product is made solely for purposes of demonstrating compatibility. The product is not sponsored or endorsed by ,or affiliated with the brands it fit ,including Supco

• 【 MODEL NUMBER】:RCO210 - RSC Series Solid State Relay Overload & Start Capacitor Combination,; includes relay, overload, and start capacitor.Please check the model number carefully before ordering.
• 【FOR COMPRESSOR】:For compressor sizes 1/12 HP through 1/2 HP.Voltage-120VAC.RCO210 3 in 1 Hard Start Capacitor Replacement for all 3 electrical components - relay, overloard and start capacitor on all capillary systems.
• 【FUNCTION】 : The 3 n'1 Start Relay helps your fridge or freezer compressor last longer. It also allows the compressor to work more efficiently, which will help to lower your power bill.
• 【 PREMIUM QUALITY】: The replacement part is made from durable high quality material and well-tested by the manufacturer - Ensure long-lasting and effective performance. Whether it's pre-sales or after-sales, contact us if you have any questions
• 【HOW TO USE】： 1. Disconnect power supply. 2. Remove old relay and overload.3. Push terminal connected to white wire on RCO onto start terminal of compessor 4. Push terminal connected to red wire on RCO onto run terminal of compressor.5. Push terminal connected to black wore on RCO onto common terminal of compressor.6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut