Get your multi sport boat ready to race with a hydration system.

Overview

A through deck hydration fitting for your multisport boat.

Technical Specs

• Requires a 16mm hole to be drilled (correct type and size drill bit available from Rasdex).
  
• Supplied with large flat nylon washers to strengthen the area.
  
• A Silicone breakaway section. This creates the 'weakest link', to release the tubing from the kayak if you swim.
  
• 90 degree elbow for the underside. This will keep the inside tubing close to the hull, and out of the way.
  
• Straight joiner. This attaches permanently to the 8mm tubing from your PFD, and creates the breakaway section when inserted into the silicone breakaway piece.