R-1300-ACS Electric Kiln 1300°C / 2372°F with easy to use programmable controller and AIR Circulation System, galvanised steel

If you are looking for the kiln, which is capable of heating up evenly all your firing materials at the same time when, look no further, because our new R-1300-ACS is the perfect match for your needs. This 1300-ACS electric muffle kiln with a 32-segment programmable temperature/time controller and 11.5 C.L. The spacious chamber is especially designed for working with all, most popular materials such as: metals, ceramics, pottery, glazes, stones, enamels and others that should be heated up to temperatures up to 1300 c/2372 f. For your safety, this kiln has a secure mechanism that will disconnect the kiln’s power supply from the heating element/s if the door of the kiln is open or closed not properly. It also has one 16-mm hole with a stainless steel shutter on the door to see firing objects during firing process. This kiln has also a digital, over/low-temperature regulation secure system to hold same temperature during the whole soaking process and a smoothing circuit digital guard for accurate reading and stability work of the programmable controller on fluctuations of electricity that is very important option for most ceramic, glazing and pottery firing processes. We designed and implemented a unique air circulation system which will allow you to distribute the heat evenly inside the chamber and therefore the materials inside will be heating up evenly throughout the entire chamber. Due to increased air flow circulation, the required firing temperature can be reached in a shorter amount of time. Also, the heat being transferred more efficiently will significantly reduce the risk of overheating the heating element and consequently will extend its lifespan, which in return will make your kiln last longer Technical specification: – Brand name: Technical Supermarket; – Model: R-1300-ACS; – 220v 60hz; – 2900 Watt; – Maximum working temperature – 1300 C (2372 F); – Kiln dimensions in MM (inch): H470 x W380 x L560 (14/2.5″ x 14.2/5″ x 18″); – New empty kiln estimated heating time to 1300 C – 90 minutes; – Chamber dimensions in MM (inch): H200 x W200 x L290 (8″ x 8″ x 11.1/2″ and 14″ Diagonal) – Continuously working time on 1300 C (2372 F): 10 minutes; – Continuously working time on 1250 C (2282 F): 30 minutes; – Continuously working time on 1200 C (2192 F): 60 minutes; – Continuously working time on temperatures below 1000 C (1832 F): 24 hours; – 32 time/temperature segments 2-line programmable temperature controller that will allows you automatically reach, hold (soak) and change up to 32 temperature/time points; – Ventilation hole on the door (with a stainless steel shutter); – Safety switch mechanism for disconnecting heating elements from power supply if door is open or closed not properly; – Position of three heating elements: right, left and top; – Digital over/low-temperature regulation secure system; – Smoothing circuit (controller’s stability work) digital guard; – Industrial graded K-thermocouple on right wall of the kiln; – Calibrated. Estimated accuracy of SOAKING temperature: +/- 1 C; – You will require a standard screw-driver to fix electrical box with temperature controller, thermocouple and safety switch’s mechanism of this kiln by few screws (supplied). – This kiln must be positioned on a fire-resist stand. – Metal stand and set of two ceramic shelves with four muffle supports for this kiln available in “Accessories”; – Weight – 42 Kg (50KG in a BOX); – Cable – 3 M.

• 32 time/temperature segments controller that will allow you to automatically reach, hold (soak) and change up to 32 temperature/time points (for regualating the heating and cooling speed)
• The unique air circulation system will allow you to distribute the heat evenly inside the chamber and therefore the materials inside will be heating up evenly throughout the entire chamber.
• Due to increased air flow circulation, the required firing temperature can be reached in a shorter amount of time.
• The heat being transferred more efficiently will significantly reduce the risk of overheating the heating element and consequently will extend its lifespan, which in return will make your kiln last longer
• One year worldwide manufacturer warranty including parts by post plus one year free online technical support on WA, Zoom or Skype
• We can manufacture every kiln to be individually designed and tailored to your exact specifications and needs