Luggage Telescopic Handle 19.52" Replacement R001# for 20 inch Suitcases with Screwdriver （Please Measure Your Product to See if it Will fit）

Features: 1. Product type: cross tube; Product section: 3 sections 2. Made of high-quality aluminum alloy, strong and 3. Suitable for 20 inch luggage 4. Great for replacing handles for your luggage, saving you from buying another luggage unnecessarily 5. and wear-resistant, requires some drilling and installation work Specifications: Color: Silver & Black Material: Plastic & Aluminum alloy Product size: (manual measurement error 1cm-2cm) Fixed length of tie rod: 49cm Stretchable length: 51cm Top cover width: 17.2cm Top cover height: 4cm Base width: 19cm Width inside the pole: 13cm Rod outer width: 20cm Total length: 97cm Product tube type: horizontal tube Number of product sections: 3 sections- Accessories: Tie rod lining Load-bearing range: about 20-30KG Features: 1. Wear-resistant, suitable for ordinary suitcases, and requires you to have strong DIY capabilities. 2. Dimension information: Extendable length: 51cm, top cover width: 17.2cm, inner width of rod: 13cm, outer width of rod: 20cm, total length: 97cm 3. Application: Replacing the suitcase telescopic handle is a great choice without having to buy a new suitcase, while also making the suitcase easier to use. 4. Exquisite process: Made of high-quality plastic and aluminum alloy, it is very durable and wear-resistant, and can meet the needs of long-term use. 5. Note: Suitable for 20-inch suitcases. The manual measurement error is 1-2cm. Please check the dimension information before purchasing. Special reminder: 1. The pull rod needs to be completely pulled out to achieve the locked state. If the pull out remains in the middle, it will slide due to gravity. 2. After the lock is completely pulled out, it will not automatically slide down. If you need to shrink, just press and hold the button on the handle. -- What are the types of pull rods? The luggage tie rod is roughly divided into built-in tie rods and horizontal tie rods (i.e., external tie rods) according to the installation position. What is the difference between a built-in tie rod and a horizontal bar tie rod? Built-in pull rod: Fixed with a base, and make sure that the base screw hole position is consistent with the hole position at the bottom of the original bag. Horizontal strip: Fixed with a horizontal strip, and make sure that the horizontal screw hole position is consistent with the hole position on the back of the original luggage. Three important parameters for purchasing built-in tie rods: Top cover width If the width and installation hole position of the upper cover are the same as the original upper cover, the new upper cover can be installed directly. If the width of the upper cover is the same, but the installation hole position is inconsistent with the original upper cover, as long as the new upper cover can cover the installation position of the original upper cover, you can re-punch the hole in the box to install it. (If you don't want to re-punch the holes in the box, you can directly keep the original upper cover and install it on the new pull rod) The tie rod is fixed in length. (i.e. consistent with the net height of the suitcase (excluding wheels)) Confirm the mounting hole position of the upper and lower covers of the pull rod. Notes: 1. Please determine the type of tie rod that suits the luggage before purchasing. 2. Compare the size of the hole position and compare the distribution of the hole position. (If the hole position is inconsistent, you need to drill holes on the base of the pull rod to adapt to the luggage. If you do not want to drill holes, you must ensure that the hole position is consistent) 3. Determine the fixed length of the lever that needs to be replaced (the net height of the suitcase does not include the wheels). 4. Only after confirming the size is correct can you ensure a perfect replacement. Warm reminder: These are DIY replacement repair supplies. The tie rod is not suitable for all suitcases. If you are not sure whether the size is suitable for your suitcase, you can fix the length of the tie rod picture or the hole position map of the tie rod and the tie rod. Leave a message to us for the type of tie rod, and we will find the right tie rod as soon as possible and feedback it to you. Package include: 1 x Luggage Telescopic Handle Replacement 4 x Flat Head Screw 4 x Nut 4 x Gasket 1 x Screwdriver

• Product type: cross tube; Product section: 3 sections
• Made of high-quality aluminum alloy, strong and .
• Suitable for 20 inch luggage
• Great for replacing handles for your luggage, saving you from buying another luggage unnecessarily
• and wear-resistant, requires some drilling and installation work
• Wear-resistant, suitable for ordinary suitcases, and requires you to have strong DIY capabilities.
• Dimension information: Extendable length: 51cm, top cover width: 17.2cm, inner width of rod: 13cm, outer width of rod: 20cm, total length: 97cm
• Application: Replacing the suitcase telescopic handle is a great choice without having to buy a new suitcase, while also making the suitcase easier to use.
• Exquisite process: Made of high-quality plastic and aluminum alloy, it is wear-resistant, and can meet the needs of long-term use.