Low Noise 220v Dc Permanent Magnet Motor 250w 400w 500w Slow Speed Motor Pure Copper Wound Double Bearing Cw CCW

220V 250W 400W 500W Low Noise Slow Speed Motor DC Permanent Magnet Motor Pure Copper Wound Double Bearing CW CCWDC Permanent Magnet Motor *1PC nd rectifier bridge*1PCorDC Permanent Magnet Motor*1PC and bracket*1PC And rectifier bridge*1PCNotice:(1) The motor is 220V DC and must be connected to the provided rectifier bridge in order to use 220V AC power; Never directly connect the motor to 220V AC power. If it is connected incorrectly and burned out, our store will not be responsible.(2) The motor has no heat dissipation function, and it is recommended to control the usage time for 250W/500W and 4000 rpm within one hour; Within 40 minutes of 400W.(3) If used in belt sanding machines, table saws, table drills, and lathes, an unpowered spindle must be added and the motor cannot be used directly, as this can easily overload and burn out the motor.(4) The motor is a carbon brush motor with a lifespan of about 2500 hours. It supports forward and reverse rotation and requires a self equipped forward and reverse switch.(5)Precautions for using speed controllers:The speed control range is 10% -100%. The lower the speed, the smaller the force. When the load is too large, there will be a phenomenon of burning the motor or speed controller. So it is recommended that you use a certain speed, buy a similar speed, and make slight adjustments to the speed controller instead of a large speed adjustment.Output Power : 74.6-735(include735)Construction : Permanent MagnetProtect Feature : Totally EnclosedEfficiency : IE 2Output Voltage : 250W 400W 500W

• DUOCARA Low Noise 220v Dc Permanent Magnet Motor 250w 400w 500w Slow Speed Motor Pure Copper Wound Double Bearing Cw Ccw