LLS | Scene10cas 0-10VDC Casambi Scene Selector | DMX Engineering

Scene10cas is a Casambi “Gateway” device designed to utilize a connection to a standard 0-10VDC analog dimming master controller to provide a remote selection of pre-defined Casambi Scenes and Scene Intensity. Scene10cas is connected between a 12-24 VDC Class 2 power supply and a two-channel 0-10VDC master. Scene10cas decodes both 0-10VDC channels and provides Scene selections by mapping the first 0-10V channel into voltage segments, which are then selected depending on the voltage level. The second 0-10VDC channel provides a 0-100% intensity selection for the selected Casambi Scene. Voltage trim and hysteresis values are also provided to implement installations where the 0-10VDC levels may not be in full range or are noisy due to installation factors. Scene10cas can be configured with the Casambi app which can be downloaded. Different Casambi enabled products can be used from a simple single luminaire direct control to a complete and full-featured.

• INPUT: Voltage range: 12-24 VDC, Class 2 No-load input current: 30 mA
• 0-10VDC Input (A and B) Configuration: 3-wire non-isolated DMX-512 2-wire analog 0-10VDC, two channels 1mA source current, the input must sink for control Top and bottom “trim” and hysteresis user programmable Casambi Vendor Parameters
• Scene Control/Selection: Number of Scenes – determines the voltage window range for each Scene. For example, if 4 Scenes are desired, this sets the voltage window to 2.5V (10V/4 = 2.5V) per Scene Channel 1—Scene selection Channel 2—Intensity level
• RADIO TRANSCEIVER: Operating frequencies: 2.401-2.483 Ghz Maximum output power: typ. +0 dBm, +/-3dBm
• OPERATING CONDITIONS: Ambient temperature, ta: -13…+113°F (-25…+45°C) Max. case temperature, tc: +167°F (+75°C) Storage temperature: -13…+167°F (-25…+75°C) Max. relative humidity: 0…80%, non-cond.
• CONNECTORS: Wire range, solid & stranded: 0.5 – 1.5 mm2 14 – 22 AWG Wire strip length: .25” (6 – 7 mm) Tightening force: 0.4 Nm / 2.6 Lb-in