Kyoritsu 2200 Digital Clamp-Meter, 1,000A AC, Conductors to 33mm, Voltage and Resistance Measurement

Kyoritsu 2200 AC current digital clamp meter ultra slim and lightweight handy design. 1000A AC clamp meter AC40/400/1000A auto range. 33mm tear drop jaw easy to use in tight places. Digital multimeter function ACV, DCV, Ohm, continuity buzzer. AC current range: 40.00/400.0/1000A (auto-ranging). Accuracy: +/-1.4 percent rdg+/-6dgt (50/60Hz) +/-1.6 percent rdg+/-6dgt (45-65Hz). AC voltage range: 4.000/40.00/400.0/600V (auto-ranging). Accuracy: +/-1.8 percent rdg+/-7dgt (45-65Hz) +/-2.3 percent rdg+/-8dgt (65-500Hz). DC voltage range: 400.0mV/4.000/40.00/400.0/600V (auto-ranging). Accuracy: +/-1.0 percent rdg+/-3dgt. Resistance: 400.0ohm/4.000/40.00/400.0kohm/4.000/40.00Mohm (auto-ranging). Accuracy: +/-2.0 percent rdg+/-4dgt (0-400kohm) +/-4.0 percent rdg+/-4dgt (4Mohm) +/-8.0 percent rdg+/-4dgt (40Mohm). Continuity buzzer: buzzer sounds below 50+30 ohm. Conductor size: 33mm maximum. Withstand voltage: 5320V AC for 5 seconds(AC A), 3540V AC for 5 seconds(AC/DC V). Power source: 2 x R03/LR03 battery. Accessories includes: test leads, carrying case, 2 x R03/LR03 battery, instruction manual. Measures 190mm length by 68mm width by 20mm depth.

• Digital clamp-meter measures AC to 1,000A, AC and DC voltage to 600V, and resistance to 40 megohms
• Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
• Clamp has a jaw opening of 33mm (1.3 inches) and jaws that are 10mm (0.39 inches) thick, and measures current without touching or interrupting the circuit
• Meter is sized for portability, weighing 120g (4.2oz.), with an overall length of 190mm (7.48 inches)
• Meets IEC safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT III installations to 600V for current measurement and to 300V for voltage measurement