Karnak 550W-06 White Patch-N-Go Waterproof Tape – Reinforce, Seal & Waterproof Leaky EPDM, TPO, Single Ply, RV and Mobile Home Roofs in One Step - Aluminum Faced – High Temp Butyl Rubber (6" x 65.5')

History: Karnak Corp has been around for over 85 years manufacturing the highest quality sustainable roofing and building solutions to protect, restore, and extend the life of the building envelope while reducing the environmental impact. APPLICATION: After surface has been properly prepared, cut desired length of 550 Patch-N-Go. Remove silicone release liner and position over desired area. Apply the tape directly to the area exactly the first time. Trying to remove may damage the tape and roofing surface. Press down firmly with a cloth pad, finger pressure or roller making sure tape stays conforming to the roof surface as you smooth out on to the surface. Tape should be free of fishmouths and tunnels. Edges, including end laps, should be sealed after installation. FEATURES, BENEFITS AND ADVANTAGES: 1. Seals and waterproofs 2. Bonds to many different roof surfaces and substrates 3. Easy release backing 4. Able to be coated over with solvent and acrylic based coatings 5. VOC Free SURFACE PREPARATIONS: All surfaces to be sealed should be dry, smooth, clean and free from dirt, dust, oxidized carbon dust, loose paint or coatings, oil, grease, rust, or other foreign matter. Recommended application temperature is 32°F to 120°F. Clean single ply membrane surfaces with toluene, xylene, acetone or single ply manufacturer’s primer or splice wash. Clean metal with similar solvent or 799 Wash-N-Prep and water. Follow instructions and SDS safety precautions of primer, wash or solvent manufacturer carefully when using. CAUTION: Do not apply when rain is imminent. Protect from freezing. Store in a heated room and keep rolls covered when not in use. Dispose of in an environmentally safe manner. For exterior use only.

• COUNTLESS USES: 550W-06 is designed for sealing seams, flashing curbs and making repairs on metal, single ply, EPDM, and most TPO and PVC surfaces. Other uses include sealing ductwork, trailers, mobile homes, trucks, gutters, skylights, concrete, gypsum boards, plastic, glass, wood, asphalt, Plexiglas and most common building materials
• EASY APPLICATION: 550W can easily be applied by simply peeling off the release liner and adhering it to a clean surface. Press down firmly with a cloth pad, finger pressure or roller making sure the tape stays conformed to the roof surface as you smooth out the tape on the surface. Tape should be free of fishmouths and tunnels. Edges, including end laps, should be sealed after installation
• HIGH TEMP SEALANT: 550W self-sealing tape is composed of highly-adhesive, high-temperature butyl rubber sealant with an protective aluminum film to strengthen and protect the seal (35 mils thick)
• UV RESISTANT & FLEXIBLE: 550W is composed of UV Resistant material meaning it remains strong even after long periods of exposure to the sun and other outdoor elements. 550B highly adhesive bond stays flexible in a wide range of applications and temperatures
• BONDS IMMEDIATELY: 550W bonds immediately and can be painted over - Bonds to solvent and acrylic based coatings & paints