Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.

If you're ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there's plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2" female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber's tape) that best suits your setup and you'll off and running.

The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler's ball valve to the sparge arm assembly, we recommend a 1/2" MPT x 3/8" Barb fitting and 3/8" ID silicone tubing. Plumber's tape will ensure you have a leak-proof connection between the barb fitting and the ball valve.

Includes:

• Insulated beverage cooler
  • Max Volume: 14.7 Gal (56 L)
• Stainless dome-shaped perforated false bottom
• High temperature silicone tubing
• Stainless 1/2" BSP ball valve

External Dimensions: Approx. 19" L x 19" W x 22" H

KegLand Part Number: KL04671

Please note: the mash tun may come with a little extra silicone tubing than what's needed. Check that your false bottom is sitting flat and in the middle of the cooler and cut off excess tubing if needed.