Hydraulic Directional Control Valve D03 (NG6) Cetop 3 Manual Lever Operated 21 GPM 4560 psi (D-Detent Hold, H-All Ports Open to Tank in Center position)

Hydraulic Directional Control Valve – Manual Operated. Proven high quality robust valve design successfully designed into many high volume applications. D03 (NG6) Cetop mounting. Can be mounted to standard available sub plates and bar manifolds. Maximum flow of 15.8 gpm Maximum working pressure = 4560psi (315 Bar) Manual Lever operated 3-position and 2-Position With automatic spring return of spool or detent to hold position until force is applied to the lever Valve can be mounted in any direction NBR Buna Seals Use with mineral based hydraulic fluid. Four fastening screws included, M5x45mm long White label with no logo for OEM manufacturers. Weight = 3.6 lbs (1.62 kg) Options: Shifting type: automatic spring return or detent to hold until force applied to lever Spool Configurations: C: Closed center spool, all ports blocked when centered. Useful to switch actuator directions and to fully stop cylinder or motor when centered. Make sure there is a relief valve to protect overrunning loads from spiking the pressure during sudden stops when centering. Note that there is some leakage of oil across the spool in the center position and slow drifting of the actuator could be possible. M: Motor spool, A and B ports to tank and P port blocked when centered. Motors and cylinders will coast to a stop when centering. Actuators will move freely from external forces when the valve is in the center position. Adding an A&B port P.O. check valve under this valve will ensure a positive stop and hold the position of a motor and cylinder for longer durations than with just a closed center spool valve C. AC: Pressure to A port and B port to tank in neutral position. When lever shifted, Pressure directs to B port and A port to tank. During transition between spool positions all ports are blocked.

• Universal hydraulic valve design mounts to readily available in the market sub plates and manifolds for threaded hydraulic connections. Mounts to D03 (USA) and NG6 (International) mounting patterns. Used in demanding new applications and also to replace existing valves that are made from various manufacturers. Just confirm the spool type and that the mounting type is the same.
• Includes mounting bolts (M5x45mm long)
• Used in mobile, industrial. automation and construction equipment
• Operating temperature = -22֯F to 174֯F
• Valve can be mounted in any direction.
• Robust design proven in many high-volume original equipment manufacturers machines.
• Valve can be mounted in any direction.
• Used in mobile, industrial. automation and construction equipment
• Valve can be mounted in any direction.