Hose Bibb Anti Siphon Vacuum Breaker, Plumbing FittingPlastic Hose Barb Reducer Pipe Fitting, Pagoda Joint Splicer for Water Hose Union Adapter, Fits Hoses 7-10mm, Easy to Replace, for Factory, Buildi

Specification:Material: PP, PEQuantity: 3 PCS, 6 PCSSize: 41.85*13.70mm/1.65*0.54inUpper Inner Diameter: 4.70mm/0.18inUpper Inner Diameter: 6.40mm/0.25inLower Inner Diameter: 7.60mm/0.30inLower Inner Diameter: 9.50mm/0.37inCorresponding Inside Diameter of the Hose to be Connected: 7~10mm/0.27~0.39inIndividual Net Weight: 1.20g/0.04ozOperating Temperature: -40°C/-40°F~160°C/320°FNote: Please allow for manual measurement error.Package Included:3 PCS * Plastic Pagoda JointsOr6 PCS * Plastic Pagoda Joints

• Strong AdaptabilityThe inner and outer diameters of the tiny mouth of this PP hose barb reducer pipe fitting are 4.70mm/0.18in and 6.40mm/0.25in, and the inner and outer diameters of the large mouth are 7.60mm/0.30in and 9.50mm/0.37in respectively, and the inner diameter of the hose that can be adapted to the range of 7mm/0.27in and 10mm/0.39in, which can be used with peace of mind
• Wear-Resistant and Temperature-ResistantThe pagoda joint is made of PP and PE, with good wear resistance, even if the exterior is often scratched or rubbed, it will not easily produce serious wear and tear. In addition, its use of temperature range of -40°C/-40°F ~ 160°C/320°F, can effectively withstand high or low temperatures and will not be easily damaged
• Easy to ReplaceWe offer this joint splicer in 3-piece and 6-piece quantities, this multiple pack design can facilitate you to replace the old reducer with new fittings in a timely manner to keep the water pipe working properly when the old reducer is damaged
• Wide ApplicationThis water hose union adapter is widely used, it can be applied to a variety of materials in the hose, and can transmit water, salt water and air and other media. You can use it in factories, buildings and laboratories
• Tight ConnectionThis hose connector's scientific and reasonable design of the inner diameter of the aperture so that it can closely fit the hose mouth to effectively stop slippage. At the same time, the tightness of the connection port is also very strong, after installation will not easily leakage of air and water