HONUTIGE 4Pcs Top Bearing Flush Trim Router Bits, 1/4 Inch Shank, Professional Straight Flush Trim Router Bits Set, Carbide Material, 1/4", 5/16", 3/8", 1/2" Cutting Height

Features:【MAIN MATERIAL】Made of carbide material, it has high hardness, wear resistance, good strength/toughness, and heat resistance. The handle and head are welded with high frequency and are not easy to break.【DOUBLE BEARINGS】The bearing of flush trim router bit adopts the grinding process, which has high precision, no burrs, small runout, smooth steel balls, and better stability of the double bearings.【UNIQUE DESIGN】The milling cutter's paint surface uses advanced spraying technology to be wear-resistant and textured; the chamfered handle design and the tail chamfered design make installation and disassembly easier【WIDE APPLICATION】It is suitable for solid wood, hardwood, particle board, hardness board, etc.And also for acrylic, PVC. Applicable for use on hand-held and table-mounted routers.【4 SIZES】1/4inch: 83x6.35mm/3.27x0.25inch, 3/8inch: 72.9x9.52mm/2.87x0.37inch, 5/16inch: 80x8mm/3.15x0.31inch, 1/2inch: 77x5x12.7mm/3.05x0.5inch, shank dia: 6.35mm/1/4inch.Specifications:Type: Flush Trim Router BitMaterial: Tungsten SteelColor: Blue SilverSize(L*D): About1/4inch: 83x6.35mm/3.27x0.25inch3/8inch: 72.9x9.52mm/2.87x0.37inch5/16inch: 80x8mm/3.15x0.31inch1/2inch: 77x5x12.7mm/3.05x0.5inchShank Dia: 6.35mm/1/4inchPackage Included:4pcs x Flush Trim Router Bit(4 sizes)Note:1. Due to the light and screen difference, the item's color may be slightly different from the pictures.2. Please allow 0.5-2 cm differences due to manual measurement.

• 【UNIQUE DESIGN】The milling cutter's paint surface uses advanced spraying technology to be wear-resistant and textured; the chamfered handle design and the tail chamfered design make installation and disassembly easier
• 【DOUBLE BEARINGS】The bearing of flush trim router bit adopts the grinding process, which has high precision, no burrs, small runout, smooth steel balls, and better stability of the double bearings.
• 【MAIN MATERIAL】Made of carbide material, it has high hardness, wear resistance, good strength/toughness, and heat resistance. The handle and head are welded with high frequency and are not easy to break.
• 【WIDE APPLICATION】It is suitable for solid wood, hardwood, particle board, hardness board, etc.And also for acrylic, PVC. Applicable for use on hand-held and table-mounted routers.
• 【4 SIZES】1/4inch: 83x6.35mm/3.27x0.25inch, 3/8inch: 72.9x9.52mm/2.87x0.37inch, 5/16inch: 80x8mm/3.15x0.31inch, 1/2inch: 77x5x12.7mm/3.05x0.5inch, shank dia: 6.35mm/1/4inch.