GM CLIMBING Swing Cheek Micro Pulley 30kN CE UIAA Certified

GM CLIMBING 30kN Swing Cheek Micro Pulley Mechanical advantage of pulley is an awesome thing we can have in our daily life. This micro pulley will help you get the maximum advantage with smooth rotation and easy use. Specification Sheave & Plate Material: Aluminum Breaking Load: 30kN / 6700Lb Dimension: 44.5 x 72.7 mm - 1.75 x 2.86 inch Dia. of Sheave: 32 mm / 1.26 inch Weight: 74g / 2.6Oz Max. rope compacity: 12mm / 0.47inchBlue-Ball bearing: less contact area with axle, more efficient with very little friction in system, excellent for high speed use Black-Bushing: larger contact area with axle, much less wear for longer service life, suitable for slow rigging with heavy weight Certification: CE1019 EN12278 / UIAA 127 Attention: Please don't put steel cable on the sheave of pulley.

• Slack Tending Pulley Kit from GM CLIMBING, which contains: 1x 30in 8mm Friction Hitch VT Prusik, 1x 24kN Triple Lock Oval Carabiner, 1x 30kN Swing Cheek Micro Pulley.
• Mainly used as core part of doubled-rope technique climbing system (ddrt), also widely use as flipline adjuster. For general pulley system, such kit can also made itself a pulley system with process capture.
• Ball bearing or bushing 30kN Swing Cheek Micro Pulley are chosen for kit. It's easier to install or remove rope from pulley due to swing plates, much facilitating whole set-up process.
• VT Prusik with Heat Resistance! 50% Kevlar Fiber is mingled during sheath braiding, adding durability (cord rating to 25kN) and excellent heat resistance for your friction hitch.
• Extra security is with the Triple Lock carabiner. It requires three consecutive and deliberate actions to open the gate. The chance of accidental gate opening due to rubs by ropes or gears is largely reduced and approaches zero.
• Keylock gate closing embeds a notch-free T-shape nose that eliminates the risks of ropes, slings, or bolts being snagged or getting caught in clipping and unclipping. The gate sleeve is designed to have a rougher surface by adding grooves to increase friction, which facilitates carabiner manipulation, especially for operation with gloves. CE and UIAA certified, meet ANSI Z133, 24kN breaking strength.
• It's always a good idea to have an oval locking carabiner to use with pulleys, for better balance, also for safer operation.