Geeetech TPU 1.75mm Flexible Soft Filament Gold, 10kg Spool (22 lbs.), Dimensional Accuracy +/- 0.03 mm

<p>HTML</p> <p>Geeetech TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.</p> <p>The TPU filament has high abrasion resistance and low compression compared to rubber parts, especially at higher infill.</p> <p>In comparison with most common filaments like PLA and ABS, TPU must be run much slower.</p> <p>SPECIFICATION</p> <p>Recommended Extrusion/Nozzle Temperature: 195 - 230℃</p> <p>Heated Bed Temp: 40~60℃</p> <p>Printing Speed: 30~45mm/s</p> <p>Recommended nozzel diameter: 0.5mm or above</p> <p>Print layer thickness: not less than 0.25mm</p> <p>Chamber Temp: N/A</p> <p>Fan: ON</p> <p>PRINTING TIPS:</p> <p>Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.</p> <p>With bowden extruder you might pay more attention to these tips:</p> <p>- Print slow 15-30 mm/s Printing speed</p> <p>- First layer settings. (Height 100% Width 150% speed 50% e.g.)</p> <p>- Retraction disabled. This would reduce messy, stringing or oozing printing result.</p> <p>- Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer.</p> <p>If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly.</p> <p>It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear.</p> <p>Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament.</p> <p>Packaging Included:</p> <p>1×spool of TPU filament</p>

• 【Soft Filaments of High Elasticity】--- Our Geeetech TPU Flexible Filament is a thermoplastic polyurethane (TPU) based filament specifically engineered to work on most desktop 3D printers. It has a shore hardness of 95A and can stretch 3 times more than its original length. Excellent bed adhesion, low-warp and low-odor, make these flexible 3D filaments easy to print.
• 【Clog-Free, Bubble-Free & Easy-to-use】--- Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Geeetech TPU Rolls. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag, no bubble and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking
• 【Dimensional Accuracy & Consistency】--- Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these soft TPU filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.05 mm; 1 kg spool (2.2lbs)
• 【Cost-effective and Wide Compatibility】--- With over 8 years’ 3D filaments R & D experience, thousands tons of filaments output every month, Geeetech is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Geeetech filament cost-effective and reliable for most common 3D printers
• 【LIFE-TIME GAURANTEE】--- If you have any problem,please do not hesitate to contact us. Geeetech, are your reliable 3d filaments /accessories/3d printer/3d pen supplier.