Fermzilla Plastic Pressure Kit

★★★★★ 4.4 23 Bewertungen

€4.43
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.agenciacoranto.com.ar
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€4.43
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 02.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.agenciacoranto.com.ar
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 232476890 Erscheinungsdatum 2026/06/21 Listenpreis €4.43 Modellnummer 232476890
Kategorie

Fermzilla Plastic Pressure Kit

Suits Conical and All Rounder Model

Add the optional pressure kit to your FermZilla 27L or 55L and turn your FermZilla into a true uni tank. 
Uni tanks are conical fermenters used both for fermentation and for carbonating and serving finished beer. 
This extremely inexpensive upgrade will truly show you what the FermZilla was designed for. 

Here are some possibilities

Fermenting Under Pressure:
First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. 

Carbonating, Pushing, and Serving:
When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever.  You can also choose to send carbonated beer through a beer filter on the way to your keg.  When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator.  

Lack of Oxidation
Because the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock.  

Key Features:
•    Ferment beer under pressure to reduce ester and fusel alcohol production
•    Ability to always draw clear beer with the unique, floating draw tube  
•    Keg already carbonated beer
•    Use co2 to push beer into a keg or through a filter into a keg
•    Carbonate and serve beer directly from the FermZilla, eliminating kegging all together

1 x KL10788 Red Plastic Carbonation Cap
1 x KL10788-Yellow Yellow Plastic Carbonation Cap
1 x KL17060 FermZilla SS Float & 100cm Silicone Dip Tube with Filter



Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.4 von 5
★★★★★
23 Bewertungen | 9 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
81% (19)
4 Sterne
5% (1)
3 Sterne
2% (0)
2 Sterne
1% (0)
1 Stern
11% (3)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.