Emergency Eye Wash Faucet, Foot Operated Vertical Eye Washer, Laboratory Eye Wash with Linkage Flip Basin and Abs Coating

Eyewash clamshell basin The use of 1MM thick stainless steel eyewash basin and basin cover, with a diameter of 12 inches, can effectively ensure that the eyewash wastewater does not overflow after 15 minutes of continuous use. The reasonable structure design increases the strength of the eyewash basin and effectively improves the service life of the product. The eyewash basin cover can prevent dust from the eyewash nozzle and the entire eyewash basin, effectively ensuring the cleanliness of the eyewash nozzle and the inside of the eyewash basin. Eyewash switch mode: hand and foot linkage, only need to opens the eyewash basin cover or step on the foot pedal during use, clean water is sprayed from the eyewash nozzle, close the eyewash basin cover after use, the eyewash switch is automatically closed, and the foot pedal automatically resets. After the eyewash switch is turned on, it is not manually operated and will not be turned off automatically. Product Details Product name: Vertical eye wash Main body material: SS304+ ABS Coating Function: Eye washing Working environment temperature: 0~50℃ Applicable medium:Normal temperature drinking water or water that meets hygienic standards Nominal pressure: 1.0Mpa Working pressure: 0.2Mpa-0.4Mpa Eye Wash flow: ≥11.4L/min Size: 750mm*300mm*250mm Installation and commissioning *The installation location should be within 15 meters of the accident-prone place, and the flushing place can be reached within 10 seconds of running speed. *Assemble the components as shown in the figure. The joints of the components need to be wrapped with sealing tape (such as PTFE tape), and the water pipes are connected according to the diameter of the water inlet and outlet respectively. *After connecting the inlet and drain pipes, check whether the ball valve switch is in place flexibly and whether there is jamming.

• [Main material]: Carbon steel + ABS coating that meets the standard, with excellent corrosion resistance to acids, alkalis, salts, and oil chemicals.
• [Anti-corrosion coating]: Use outdoor special ABS powder electrostatic spraying to effectively improve the acid, alkali, salt and oil resistance of the product. It is suitable for use in environments with high acid and alkali concentrations.
• [Antifreeze]: This product is equipped with a high-performance emptying antifreeze device, which is suitable for use in environments above minus 5℃. After use, turn off the eyewash switch, and the system will automatically empty the water in the pipeline. If it is used in an environment below minus 5°C, pay attention to pipe insulation and take anti-freeze measures.
• [Eyewash nozzle]: The eyewash nozzle has a built-in multi-layer filter to effectively filter impurities in the water and make the water flow into a foamy water column, effectively preventing impurities in the water or causing secondary damage to the injured eye nerves and injured parts due to excessive water flow. The filter is easy to disassemble, clean and easy to maintain.
• [Applicable places]: Widely used in nuclear energy, power plants, pharmaceuticals, , chemical, petroleum, shipping, electronics, smelting, printing and dyeing, education and scientific research and other units, industries or fields.