elitegrip Golf Grips Y360S Air Grip Ends - Body Shape 360 Seamless Injection Molded Back Line M58/M60/M62 Berlina Black Length 275mm Set of 5

Light and soft grip. The speed that wipes away moisture is different. Before shot, please wipe the water on the grip with a towel. Replacement Precautions Please check the diameter of the shaft and do not install it on objects that do not fit the thickness. Insert quickly and quickly. Make sure the grip is inserted to the end of the grip and allow it to dry for at least 48 hours until the solvent can evaporate. Use a highly volatile liquid solvent when changing grips. Some products dissolve the material depending on the type of solvent. Grips are not reusable. Precautions for Use: If any moisture that has adhered to the surface of the grip, please wipe it with a dry towel. Due to the nature of the product, temperature above 176 °F (80 °C) may cause deformation or discoloration. Please be careful to manage the temperature of the stored location. Due to the nature of the material, there may be color bleeding onto gloves due to friction. Thank you for your understanding. For dust or dirt, please wipe with a wet towel and dry it. After installing and drying, the end cap may loosen if impact occurs on the end cap, and do not twist too much than necessary

• Size: Length 10.8 inches (275 mm) / Thickness (with M60 shaft attached): 2.0 inches (50.8 mm) Location: Diameter 0.9 inches (22.0 mm) / 5.0 inches (127.0 mm) / Diameter 0.7 inches (19.5 mm) / Compatible Shaft Diameter: M58/M60/M62 / M62 / M62
• Weight: 1.4 oz ± 0.04 oz (41.0 g) / Color: Berlina Black
• Backline: Yes and Specifications: Grip Ends - Body Shape, 360 Seamless, Injection Molded
• Material: NO.NK510 special synthetic rubber (silica formulation)
• Made in Japan