Electric Mini Stove Single Electric Flat Cast Iron Heating Plate 500W Mini Stove Hot Plate Multifunctional Home Heater (US)

Specification: Condition: Brand New Material: Stainless Steel Power: 500W Heating Plate Diameter: Approx. 107mm / 4.2in Package list: 1 * Mini Stove 1 * Manual 4 * Rubber Cushion Instructions: 1. Please turn on in the fifth gear and heat for 3-5 minutes when you use the stove at the first time. There may be a small amount of smoke exhausted, which is caused by the evaporation of the protective film of the stove This is a normal . It is basically disappeared after continuous heating in the fifth gear for 10 minutes or more for 2-3 times. 2. If the bottom of the stove is not flat, concave and convex, it cannot be used. Operational Rules: Rotate the electric stove switch to operate and there are 5 ranges to adjust the temperature of the electric stove. Adjust the switch to the appropriate range to make the electric stove reach the required temperature. Please note that turn the switch to the "0"/"off" position and unplug the plug when not in use. Safety Precautions: 1. Cannot leave when using. 2. Do not touch the stove while heating. 3. Do not immerse the electric stove in water or other liquids. 4. The electric stove is for cooking food, the utensils should be put on the heating plate when you cooking. 5. When the electric stove is not in use, be sure to turn the switch to the "0"/"off" position and unplug the plug.

• 【5.6 inch Mini Stove】: The cooktop is powered by 120V (500W),Fast heating, high temperature, up to 570 degrees
• 【Compatible to 6 inch-10inch Cookwares】: However for best results use flat cookware as close to size of the (6" in diameter)
• 【Suitable for a Variety of Scenarios】: small and portable be used as a supplement to the kitchen, property, camping, travel, etc
• 【Easy to 】: The smooth of the electric heater be easily cleaned (note: do not wash the directly, just wipe it with a towel after the electric heater cools down)
• 【Temperature Adjustable】: There are 5 positions to adjust the temperature of the electric furnace. Adjust the switch to an appropriate position to make the electric furnace reach the required temperature. Note that when not in use, please set the switch to the "0"/" off "position and unplug it.