Devantech 12V, 30:1 Gear Motor w/ Encoder
Produktdetails
| Artikelnummer | 234970901 | Erscheinungsdatum | 2026/07/02 | Listenpreis | €19.09 | Modellnummer | 234970901 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- DC Gearmotor
- Nominal Voltage: 12V
- No Load RPM: 216
- Stall Current: 2.5A
- Stall Torque: 98 oz-in
- Shaft Diameter: 5 mm
- Rotary Encoder Included
The Devantech 12V, 30:1 Gear Motor w/ Encoder is a 12v motor fully equipped with encoders and a 30:1 reduction gearbox. It is ideal for small or medium robotic applications, providing cost effective drive and feedback for the user. It also includes a standard noise suppression capacitor across the motor windings.
Connectors
The EMG30 is supplied with a 6 way JST connector at the end of approx 90mm of cable as standard.
The connections are:
• Purple (1): Hall Sensor B Vout
• Blue (2): Hall sensor A Vout
• Green (3): Hall sensor ground
• Brown (4): Hall sensor VCC
• Red (5): +Motor
• Black (6): -Motor
• Wires are the colours from the actual cable
• The hall sensors accept voltages between 3.5v and 20v
• The outputs are open collector and require pull-ups to whatever signal level is required
Measured Shaft Speed when used off-load with MD23 and 12v supply
• Minimum speed: 1.5rpm
• Maximum speed: 200rpm
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage