D-Line 2X Medium Cable Raceway 39" Lengths & Accessory Pack - 2X 1.18" (W) x 0.59" (H) x 39" Lengths (6.56ft Total) with 10 Accessories - Aluminum-Effect

D-Line Medium (1.18x0.59in) Cable Raceway Bundle - Aluminum-Effect D-Line Medium Cable Raceway is great for covering cables on open walls i.e. hiding cables from wall mounted TVs or to cover cords above baseboards, with the profile scaling to appear as the natural top section of the baseboard. Half round profile of D-Line Raceways subtly blend with décor... providing a neat solution to cover cables on walls. Cable Hider lengths are also fully paintable for the perfect finish, simply key the surface with a fine sandpaper & apply two coats of paint. One-piece design & patented click lock lid of D-Line Raceway lengths enable easy handling and installation... no prior DIY or electrical know-how is required to install. All D-Line Cable Raceway lengths are supplied with strong self-adhesive backing for easy peel & stick installation (take care when positioning lengths as adhesive backing does create a strong bond.) Lengths can be drilled & screw-fixed for added stability. Clip-Over Accessories have rear grip tabs which fit securely between the gap left from adhesive backing, design forgives any imprecise cuts or measurements. Smooth-Fit Accessories internal shoulders fit securely under, providing a smooth flush finish. 10 Accessories included in bundle (use raceway accessories to cover cords around a variety of popular angles) Each Medium Cable Raceway bundle includes: 2x 1.18" (W) x 0.59" (H) x 39" Lengths (Aluminum-Effect) - 6.56ft Total Coverage 1x Clip-Over Flat Bends - change direction by 90° on flat surfaces 2x Clip-Over Internal Bends - join lengths around 90° inside corners 2x Clip-Over External Bends - join lengths around 90° outside corners 1x Clip-Over Equal Tees - join 3 lengths of the same profile 2x Smooth-Fit Couplers - join 2x lengths of the same profile on flat surfaces

• Use medium (1.18x0.59in) cord covers to neatly hide cords on walls. D-Line 1.18in (W) x 0.59in (H) Cable Raceway profile can cover up to 3 flexible cords (based on 1/3” diameter cables). D-Line Half Round Cable Covers are popular for neatly concealing wall mounted TV cords, or to conceal cables above baseboards with the half round shape of D-Line Raceway blending to appear as the natural top section.
• Easily hide cords with D-Line. One-piece design and patented click-lock lid for easy handling, each length has applied self-adhesive backing for peel & stick installation - note, if preferred lengths can be drilled & screw-fixed for added stability.
• D-Line Raceway can be cut to size if shorter lengths are required, cut using a junior hacksaw (32 tpi) for a clean cut. All cable cover lengths have a protective film cover, ensuring you receive a pristine raceway length.
• 10x D-Line Raceway Accessories included per pack - use to join lengths and to navigate corner bends, giving a perfect finish! Clip-Over design forgives rough or oblique cuts, and imprecise measuring. Smooth-Fit End-Cap and Coupler shoulders fit securely under lid providing a smooth-flush finish.
• Each pack contains: 2x 1.18" (W) x 0.59" (H) x 39in Lengths (Aluminum-Effect) - 6.56ft Total Coverage, 1x Clip-Over Flat Bend, 2x Clip-Over Internal Bend, 2x Clip-Over External Bend, 1x Clip-Over Equal Tee, 2x Smooth-Fit Couplers, 2x Smooth-Fit End Caps