CNC Interior Accessories Tool Setting Gauge,Normally Closed High Accuracy 4-Lines Z-Shaft Waterproof Automatic Tool Setting Gauge CNC Engraving Machine Parts

Automatic Tool Setting Gauge,Be sure to disconnect the power before installation. After completing the wiring, place the tool setter in another location on the tool setting base, and only after testing that the tool setting signal is normal, then secure it in the correct position.

• Precautions: Please control the tool setting speed between 50-200mm/min; the operating temperature range is 0℃-80℃; please maintain the voltage at DC 24V and the current below 20mA.
• The bending radius of the wire should be more than 7 times the wire diameter (7R).Try to install it in a location on the workbench where there is less iron filings and splashing water.
• The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output are measured
• After-sales: If you have any questions after purchase, please us in time, we will answer your questions seriously and provide high-quality after-sales service.
• Alarm can be sent when overtravel, The shell is made of ground 4S material, and not easy to damage.
• With oil-proof,dust-proof and waterproof structure, it has good durability under the conditions of cooling liquid and iron filings flying.
• No built-in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program (PLC)