Carbon Monoxide Monitor (Measuring Range: Analog: 0-300 ppm Modbus: 0-500 ppm) for Control Alarms, Ventilation Fans | Industrial Carbon Monoxide Monitor | Model: CMD5B1100

The CMD series carbon monoxide detector uses an electrochemical sensor to monitor the carbon monoxide level and outputs a factory calibrated 4-20 mA, 0-10 Vdc, or Modbus signal. Optionally, the device may be configured with an alarm relay. Applications: Control alarms, Ventilation Fans and to Digital Inputs of the B.A.S. for status monitoring

• Features: Wall Mounted| Electrochemical | Diffusion | IP65 (NEMA 4X) |
• Measurement: Electrochemical | Sample Method: Diffusion| Measurement Range: Analog : 0-300 ppm; Modbus: 0-500 ppm | Operating Temperature: -20 to 50°C (-4 to 122°F), 15 to 90 %RH, 0.9-1.1 atm | Accuracy: ±5 ppm or ±5%
• Stability: <5% signal loss/year | Response Time: <35 seconds for 90% step change| Life Expectancy: 7 years in air| Typical Coverage Area: 700m2(7500ft2) or 15m (50ft) radius | Power Supply: Analog: 24 Vdc or 24 Vac ± 10% (non-isolated half-wave rectified) Modbus: 24 Vdc ±20%
• Output Signal: 4-20 mA | Consumption: Analog : 20 mA max Modbus: 35 mA max(Non Relay)|Consumption: 40 mA max (RELAY) | Wiring Connections: Screw terminal block (14 to 22 AWG) | Enclosure: Polycarbonate or ABS, UL94-V0, IP65 (NEMA 4X) | Dimensions: 71mm W x 104mm H x 48mm D (2.8” x 4.1” x 1.9”)
• Supply Scope: 1 unit Of Greystone CMD5B1100 Carbon Monoxide Monitor and Instruction Manual | Applications: Control alarms, Ventilation Fans and to Digital Inputs of the B.A.S. for status monitoring