Calibration Test Block Ultrasonic Flaw Detector Calibration Block with 25mm and 50mm Radius, 5.0mm Hole 35 to 75 Degrees According to EN 27963, DIN 54-120, and ISO 7963

Application ●This Calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Description ●Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. ●In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. Width: 12.5, 20, or 25mm (select one) Overall Dimensions: (width) x 75mm long x 43mm tall

• This block includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees.
• In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Note:Width: 12.5, 20, or 25mm (select one)