Brewmaster R550 Sterile Siphon Starter - for 3, 5, 6, and 6.5 Gallon Carboy with Smooth Necks

Simply blow into the sterile filter, which slightly pressurizes the carboy, causing beer to flow out. Attach the sterile Siphon starter assembly by firmly pushing the orange or yellow carboy hood over the mouth of the carboy. Slide the stainless racking cane to the desired depth, just about the sediment level and blow into the white, sanitary air filter for 2-3 seconds. Blowing through the filter forces beer out through the racking cane, starting the Siphon. There is no need to worry about contamination from your mouth, as the sanitary filter removes 99.98 percent of airborne bacteria. Sterile Siphon includes: 26 inch stainless racking cane red sediment reduction tip orange carboy hood for 5 gallon Carboy5' 3/8 inch ID vinyl tubing stainless hose clamp sterile air filter about the white sterile filter: there are two sides to the filter - an "in" and an "out". the direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "in" of the filter and store in a zip-lock bag.

• 26 inch stainless racking cane
• Red sediment reduction tip
• Rubber carboy blow off hood w/white caps (3, 5, 6, 6.5 gallon smooth neck)
• 5' 3/8 inch
• Sterilized air filter