BOSCH ESI6-32N Low Viscosity, Extended Life Brake Fluid - Compatible with All Vehicles Designed to Use DOT 3, DOT 4, and DOT 5.1 Brake Fluids; 1 Quart

Bosch ESI6 is a next generation brake fluid designed for today's modern braking systems and is the first fluid to simultaneously combine both low viscosity and high wet boiling point (365 Degrees Fahrenheit). ESI6 brake fluid is designed to last longer than traditional fluids for extended replacement intervals: 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5.1 (with 30% lower viscosity). ESI6 is intended for use as a direct replacement for vehicles that specify DOT 3, DOT 4 or DOT 5.1 fluid, which includes the majority of all brake systems launched since 1990. ESI6 delivers excellent lubricity properties to prevent brake system component wear and reduce noise. ESI6 is fully compatible with DOT 3, DOT 4, and DOT 5.1 fluids for top off but optimum performance is achieved with a full fluid change. While ESI6 exceeds all DOT standards for DOT 3, DOT 4, and DOT 5.1 fluids, it is NOT compatible with vehicles that require/use DOT 5 fluids - never use any fluid other than DOT 5 in DOT 5 systems. When doing a full fluid change, multiple quarts will be necessary to properly flush the old fluid from the system and bleed the brake system after refilling with ESI6. WARNING: This product can expose you to chemicals including Ethylene Oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov.

• [NEXT GENERATION FLUID] - Bosch ESI6 is a next generation brake fluid designed for today's modern braking systems and is the first fluid to simultaneously combine both low viscosity and high wet boiling point (365 Degrees Fahrenheit)
• [EXTENDED SERVICE INTERVAL] - ESI6 is designed to last longer than traditional fluids for extended replacement intervals: 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5.1 (with 30% lower viscosity)
• [BACKWARD COMPATIBLE} - ESI6 is intended for use as a direct replacement for vehicles that specify DOT 3, DOT 4 or DOT 5.1 fluid which includes the majority of all brake systems launched since 1990
• [REDUCES WEAR] - ESI6 delivers excellent lubricity properties to prevent brake system component wear and reduce noise; ESI6 is fully compatible with DOT 3, DOT 4, and DOT 5.1 fluids for top off but optimum performance is achieved with a full fluid change
• [NOT DOT 5 COMPATIBLE] - ESI6 exceeds all DOT standards for DOT 3, DOT 4, and DOT 5.1 fluids but is NOT compatible with vehicles that require/use DOT 5 fluids - never use any fluid other than DOT 5 in DOT 5 systems
• 1 Quart (32 ounces) - When doing a full fluid change, multiple quarts will be necessary to properly flush the old fluid from the system and bleed the brake system after refilling with ESI6