BOJACK Outdoor Hard-Wired Post Eye Light Control with Light Sensor Direct Wire-in Electronic Photocontrol with Photocell Light Sensor for Outdoor Lighting

BOJACK Outdoor Hard-Wired Post Eye Light Control Specifications ModelNo.JL-403C Rated Voltage:120-277VAC Rated Frequency:50/60Hz Rated Loading:500W Tungsten, 850VA Ballast 5A e-Ballast Power Consumption:1.8W@120VAC Operate Levels:10~20Lx Turn-On/30~80Lx Turn-Off Ambient Temperature:-40°C~+70°C Related Humidity:96% Leads:AWG #18,AWM 1015 4”min Rainproof Cap:Yes Pay Attention when Installing 1.Disconnect power, remove junction box cover, place thephotocontrol through knockout hole and fasten with locknut. 2.Do not install the photocontrol with the Photocell facingartificialor reflected light. This may cause the unit to cycle onand off at night. Scope of Application The photocontrol is applicable to control the street lighting, passage lighting and doorwaylighting automatically in accordance with the ambient lighting level.Compatible with LED, halogen, metal halide and incandescent. Assemblies Rainproof Cap+Lock-nut+Gasket+Panel

• 【Intelligent Design】According to ambient lighting levels.The internal design has an automatic ambient light level detection circuit that automatically switches off during the day and on at night.
• 【Stable and Safe】Weatherproof and anti-rust, reliable and quality.Built-in external photosensitive switch, also applied as a small and rainproof street light controller photoelectric switch.
• 【Waterproof Design】Water resist body protects the sensor against weather elements such as rain and dust.
• 【Built-in Delay Function】Built-in time delay function eliminates the load temporarily switching off due to car headlights, lightening or another temporary light source.
• 【Scope of Application】The photocontrol is applicable to control the street lighting, passage lighting and doorwaylighting automatically in accordance with the ambient lighting level.Compatible with LED, halogen, metal halide and incandescent.