Beige 8ft Tube Slat for Chain Link Fence

<p>8ft Beige Tube SlatsTM by Slat WarehouseTM can be added to existing chain link fence to improve privacy, security, and aesthetics. Slats are economical and easy to install. Each box contains 82 slats and 10 feet of Viper Lock ChannelTM - enough to cover 10 linear feet of three foot tall chainlink fence. Each individual slat measures 1.094 (1-3/32) inches wide and can be installed in 11.5, 11, or 9 gauge chain link fabric with a diamond pattern ranging from 2 to 2.375 inches. Slats are approximately 92.5 inches long (3.5 inches shorter than the overall height of the chain link fence) to facilitate installation.</p>

.
• Add privacy, security, and curb appeal to your existing chain link fence.
• Easy to install. No tools necessary.
• Double wall, tubular slat is 1.094 inches wide and provides up to 75% coverage.
• Each bag includes 82 slats and 10 feet of bottom locking channel.
• Covered by industry leading 25 year warranty.

To install, simply slide the Viper Lock ChannelTM horizontally into the bottom of the first fully enclosed diamond of chain link (see details in pictures) and then slide each slat vertically through the diamonds of the chain link until it clicks into the locking channel. Take care to face each slat the same direction. DO NOT WEAVE in and out of the chain link. Chain link is woven in a way that leaves a space for the slat to slide down through the fence. Damaged or bent chain link fence may need to be repaired to facilitate slat installation. It is the owner's responsibility to ensure your fence will withstand the increased wind load of adding slats.

How much privacy can I expect? The amount of privacy achieved varies depending on the size of the diamond of the chain link used. The size of the chain link diamond is the space measured between two parallel wires in the diamond weave (not corner to corner). Two inch diamond requires approximately 82 slats every 10 feet providing 75 percent coverage (1.094" x 82 ÷ 120" = 74.7%). Economy chain link with a 2.375" diamond requires approximately 74 slats every 10 feet providing 65% coverage (1.094" x 74 ÷ 120" = 67.4%). Chain link fabric with a diamond pattern larger than two inches will use fewer slats than provided in each unit. Extra Viper Lock ChannelTM is available for purchase to use with extra slats.