BC-5A Battery Charger 12V/24V Power Supply Plastic Shell for Diesel Generator Genset Float Charging

Battery ChargersBC-5A series are state of the art battery chargers featuring very high efficiency and low cost in a compact DIN rail mounted plastic package.Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment.Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections. The overload protection is current limiting type, not hiccup. Hiccup protected chargers will turn-off in case of overload and will be incapable of charging an empty battery with their rated current. In case of a short circuit or overload condition, the BC-5A charger does not shut-off, and delivers simply the rated current, allowing a full-speed charge of an empty battery.In case of overheating, the charger will automatically reduce its output current and continue normal operation.Chargers offer automatic battery voltage detection. Thus the same module operates at 12V or 24V without the need of a manual selection, removing human errors.BC-5A chargers have 170-305V input voltage range, enabling the use in most countries with nominal voltages ranging from 220VAC to 277VAC. The nominal output is fully available at all 170-305VAC range without derating.Chargers offer green mode of operation. The green mode consists on reducing the operating frequency when the load decreases. Thus chargers reduce their losses helping protection of the environment. At very small loads, they enter into a burst mode to reduce the consumption further.Chargers feature very low power consumption at no-load mode, helping again the protection of the environment.The peak efficiency of chargers exceeds 91.5%, resulting in lower long-term operational costs. As an example, compared to a 24V/5A charger of 85% efficiency, with 30% average load and 20 years of operational life, BC-5A will consume 600 kW-hour less electrical energy. This leads approximately to 60 USD less energy expense per charger.The rectifier fail output is capable of driving a relay or transmitting the operational status to a control module which will give an alarm in case of failure.FEATURESVery high efficiency, up to 91.6% (see charts)Wide operating voltage range (170-305VAC)Reverse battery connection protectedLED status indicatorLow power consumption at no-load modeGreen mode operationOutput short circuit and overload protectionHigh temperature protection2 stage charging for continuous connectionRectifier fail outputWide operating temperature rangeLow output ripple & noiseLow line and load regulationsDIN rail mounted, small dimensionsLow weightTECHNICAL SPECIFICATIONSTechnology: Switchmode, flyback 65 kHzOutput voltage (Vo): autoselect, 13.50 or 27.00 VDCOutput current (Io): 5.0 ADC (continuous)Input voltage range: 170-305 VAC (220-277V nominal)Input current: 1.5 ARMS max. (@170 VAC)Input frequency range: 45-68 HzCooling: natural convection<; 160 WattsPeak Efficiency: > 91.5% (230VAC, 24VDC)Output power: 135 Watts max continuous,<; 0.3W @ 230VAC/24VDC<; 0.15W @ 230VAC/12VDC<; 0.5% of Vo (peak-to-peak)<; 40mV <; 0.5% of Vo<; 0.01% of Vo<; 0.5% of Vo<; 3% of Vo (@ to 0% load change)<; 10mAOverload protection: limits output current to 5AShort circuit protection: limits output current to 5AShort circuit duration: unlimitedHigh temp. protection: limits internal temp. to 90°CRectifier fail output: negative pulling protected semiconductor output, rated 1Amp@30VDCIsolation:Input-output: 3300 VACInput-ground: 1650 VACOutput-ground: 1650 VACOperating temperature range: -30 ºC to +80 ºCStorage temp. range: -40 ºC to +80 ºCMax relative humidity: 95% (non condensing)Dimensions: 70mm(W) x 99mm(H) x 60mm(D)Weight (approx): 210 gramsElectrical connections: two part connector, 2.5 mm2==========Hign-concerned Chemical : None

• Battery Chargers
• BC-5A Battery Charger 12V/24V Power Supply plastic Shell for Diesel Generator Genset Float Charging