AudioControl LC7iPRO 6-Channel Active Line Output Converter with AccuBASS for Adding Subwoofers, Amplifiers to Factory Car Audio Receiver Head Unit, Includes ACR-1 Dash Remote Bass Knob Controller

AudioControl brings you our most advanced line of LOCs yet. OEM integration has never been easier with the host of intelligent built-in features like LMC (Load Matching Circuit), allowing even the most finicky factory sound systems to no longer be an obstacle to great sound. Installer-friendly trigger modes offer flexibility and an expedited installation time since the units can be turned on via GTO Signal Sense (DC offset), audio signal sensing, or standard remote 12 volt input. All PRO series products feature AudioContol’s patented AccuBASS for restoring low frequency output diminished by factory processing, and an ACR-1 level control is included to dial in the perfect level for your subwoofer right from the comfort of the driver’s seat. The Pro series ensures that you will start with the clean, powerful signal you need to take your system from sounding good to sounding great.

• 𝗨𝗽𝗴𝗿𝗮𝗱𝗲 𝘆𝗼𝘂𝗿 𝗮𝘂𝗱𝗶𝗼 𝘀𝘆𝘀𝘁𝗲𝗺 𝘄𝗵𝗶𝗹𝗲 𝗸𝗲𝗲𝗽𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝘀𝘁𝗲𝗿𝗲𝗼: Convert speaker-level signals up to 400W (40V) per channel from your OEM radio or amplifier to high quality pre-amp output signals directed to aftermarket subwoofers, amplifiers, and processors.
• 𝗠𝗮𝘅𝗶𝗺𝗶𝘇𝗲 𝘆𝗼𝘂𝗿 𝗯𝗮𝘀𝘀: AccuBASS processing technology corrects and restores bass roll-off when the volume is increased on the factory radio.
• 𝗦𝗲𝗮𝗺𝗹𝗲𝘀𝘀𝗹𝘆 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲 𝘄𝗶𝘁𝗵 𝗺𝗼𝘀𝘁 𝘃𝗲𝗵𝗶𝗰𝗹𝗲𝘀: Onboard load selection switches (20 ohms, 60 ohms, and 20k ohms) allow interfacing with modern factory-amplified audio systems.
• 𝗖𝗼𝗻𝗻𝗲𝗰𝘁 𝘁𝗼 𝗮𝗻𝘆 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗮𝘂𝗱𝗶𝗼 𝘀𝘆𝘀𝘁𝗲𝗺: Easily sum or separate audio signals by using the the Signal Bus switch.
• 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝘀𝘂𝗯𝘄𝗼𝗼𝗳𝗲𝗿 𝗹𝗲𝘃𝗲𝗹𝘀 𝗳𝗿𝗼𝗺 𝘁𝗵𝗲 𝗱𝗿𝗶𝘃𝗲𝗿’𝘀 𝘀𝗲𝗮𝘁: Includes the ACR-1 dash knob remote, a 20-foot remote cable, and metal housing with integrated removable mounting tabs for custom flush mount installations.
• 𝗚𝗮𝗶𝗻 𝗳𝘂𝗹𝗹 𝗰𝗼𝗻𝘁𝗿𝗼𝗹 𝗼𝘃𝗲𝗿 𝘆𝗼𝘂𝗿 𝘀𝗼𝘂𝗻𝗱: Fixed and variable outputs with discrete onboard level controls allow you customize your audio and make adjustments easily.
• 𝗖𝗵𝗼𝗼𝘀𝗲 𝘆𝗼𝘂𝗿 𝘁𝘂𝗿𝗻-𝗼𝗻 𝗺𝗼𝗱𝗲: Features selectable Great Turn On (GTO) signal sense and audio sense to automatically power the LOC or remote 12V input for manual control.
• 𝗘𝗹𝗶𝗺𝗶𝗻𝗮𝘁𝗲 𝗻𝗼𝗶𝘀𝗲: Selectable ground isolation switch allows you to remove ground buzz or alternator whine.
• 𝗧𝘂𝗿𝗻 𝗼𝗻 𝘆𝗼𝘂𝗿 𝗼𝘁𝗵𝗲𝗿 𝗱𝗲𝘃𝗶𝗰𝗲𝘀: By using the ‘Remote Out,’ this line out converter can trigger up to 2 devices down the signal chain including amplifiers, line drivers, crossovers, or any other device with a ‘Remote In.’
• 𝗦𝗮𝘃𝗲 𝘃𝗲𝗵𝗶𝗰𝗹𝗲 𝘀𝗽𝗮𝗰𝗲: Designed with a compact slim chassis to fit discreetly in your car without taking up extra room. Dimensions: 7”L x 5.1”D x 1.14”H (including speaker connectors).