ART エー・アール・ティー マイク・スプリッター SplitCom Pro 【国内正規輸入品】

The SplitComPro is a single splitter Balance, low impedance and microphone signals Can also be used as a combination As a splitter In addition to direct out as a splitter. Equipped with isolation outs, The signal of a single microphone can be split into 2, Isolates the main out into the FOH console You can send it to a monitor, recorder, etc. The main out can pass the phantom power from a mixer, etc. Condenser microphone. Isolate out blocks the phantom power. As a combination As a combiner, you can put the two microphones together. Output from 1 out. Equipped with a Phase switch, The polarity of the isolation microphone input can be reversed. If the mixer runs out of channels, Channel saving. Phantom power from MAIN to MAIN, It will pass through ISOLATED to ISOLATED. The signal path between MAIN and ISOLAETD is blocked and Only audio signals are played. Features: Low distortion and wide frequency characteristics Can be used as a splitter or a combination Equipped with phase reverse switch Galvanic isolation blocks phantom power between channels Equipped with ground switch. Specifications: Frequency Response: 20Hz to 150K Hz, +/-0.2dB @ 0 dBu Total Harmonic Distortion: Less than 0.0007% from 20 Hz to 20K Hz at 0 dBu input Phase Response: Less than 10 degrees at 20 to 150K Hz (ref.1K Hz) Typical Driving Source Impedance: 150 Ohms Typical Output Load Impedance: 1K Ohms Dimensions: 44.5mm x 107mm x 89mm Weight: 0.6 lbs (0.3 kg).

• Small and easy microphone splitter and microphone combination
• Splitter splitter splitter splits signals into two microphones
• Combine two microphones together for one outputs
• Phase Reverse Switch
• This is a domestic import product. Comes with a 1 year warranty against the date of purchase. You will be supported by an authorized reseller even after the free warranty period