APC Rack PDU 2G, Switched, Zero U, 5.7KW, 200/208V, (21) C13 Outputs, and (3) C19 Outputs (AP8961)

APC Switched Rack Power Distribution Units (PDUs) enable advanced user-customizable power control and active monitoring Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets Power sequencing delays allow users to define the order in which to power up or down attached equipment Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding Current metering provides real-time remote monitoring of connected loads Switched Rack PDUs include real power monitoring a temperature/humidity sensor port locking IEC receptacles and low profile circuit breakers User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access configure and control Switched Rack PDUs through secure Web SNMP or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central Capacity Manager and Change Manager

• Allows four rack PDUs to be connected using In and Out ports so that only one network connection is necessary
• Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment)
• Full-featured network management interfaces that provide standards-based management via Web SNMP and Telnet Allows users to access configure and manage rack PDUs from remote locations to save valuable time Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements
• Allows users to configure the sequence in which power is turned on or off for each outlet This helps avoid in-rushes at start-up which can cause overloaded circuits and dropped loads Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly