AIZYR 3/8'' X 8M Immersion Wort Chiller, 304 Stainless Steel Cooling Coil Tube with Water Adaptor & Silicone Tubing Heat Exchanger Homebrew Beer Cooler

What Is an Immersion Chiller?● Brewery cooling device that consists of a length of coiled tubing.● You drop the apparatus directly into the hot wort, and then connect with cooling fluid(usually is tap water from faucet)● As the cool water flows through the coil, it absorbs heat from the wort mix and therefore reduces its temperature.Advantages of Using an Immersion Chiller:● There is a minimal risk of contamination as brewing wort is not cycled through a separate container.● Immersion chiller coils are cheap to purchase and economical to operate.● Clean up is easy too. You only need to wash the outside.Specification:Material: 304 Stainless SteelOverall Height: 35.5cmCoil Diameter: 3/8 inch (9.52mm)Tube Thickness: 0.5mmCoil Length: 8MCoil Height: 10cmCoil Width: 23.5cmPackage Include:1 Pc x Immersion Chiller1 Pc x Water Adaptor1 Pc x 2m Silicone tubing

• Convoluted internal coil gives the wort greater surface area for contact with the cold water. Reduces the amount of water needed to cool the wort! Wort runs through one tube, while the cold water runs through another tube allowing for the shortest possible cool off times.
• Advantages of Using an Immersion Chiller: There is a minimal risk of contamination as brewing wort is not cycled through a separate container. Clean up is easy too. You only need to wash the outside.
• Immersion cooler is the guarantee for the production delicious craft beer, brewed by yourself in the comfort of your own home. Perfect for the kitchen homebrewer that is making extract batches.
• Wort chiller is used for cooling beer or malt. Cooling the cooked wort fastly,let the wort reach the preference temperature of Yeast inoculation.
• Stainless Steel Construction: Solidly constructed of 304 stainless steel. Stainless steel is more durable towards wearthan copper, easy to clean,no rust and no effect on the taste of the mash