ADVANCE IGNITION Right Passenger Inside Interior Door Handle Puller Compatible with Mercedes Benz 1998-2003 CLK320 CLK430 CLK55 AMG 3.2L 4.3L 5.5L

Brand New Our Inside Interior Door Handle Puller. Compatible with Mercedes Benz 98-03 CLK320, CLK430, CLK55 AMG Models There are 2 door pullers on each car. One for left driver side one for right passenger side. Each door puller comes with 5 screw holes. 2 upper & 2 lower tighten against to door panel. One screw at the center is the main support between the large metal door to the door panel. The center support area insufficient design causes of commonly door puller breaks apart. The dealer Only available in A complete expensive door panel. Many of door panel had discontinued. Our redesign added 8 additional supports to reinforce the weak area causes the commonly Broken problem. Ensure it long lasting out last the OE design. Repair it not replacing the complete expensive door panel. Driver and Passenger Side Door Puller Remove and Installation Procedure Tool Requires 1)8 mm socket 2)A Small Socket Extension 3)A Rachet 4)Phillip Head Screwdriver 1) After the door panel remove, lei it down on a table or a bench. 2) Use the rachet connecting to a small extension & 8 mm socket to remove two 8mm screws from rear of the door panel near by the door handle opening area. 3) Use A Phillip Head screwdriver to remove 2 Phillip screws, pull out the old handle from front of door panel, 4) Install the new door handle to the panel. Note: Do not over tighten the screws, 10-12 ft Lbs. to 8mm screws, 6-8 ft Lbs. to Phillip screws. Part Number: A208810654, 208810654 Position: Right Passenger Side Compatible with Mercedes Benz 1998-2003 Mercedes-Benz CLK320 3.2L V6 Gas 1999-2003 Mercedes-Benz CLK430 4.3L V8 Gas 2001-2003 Mercedes-Benz CLK55 AMG 5.5L V8 Compatibility info provided only for US models.

• Enhanced durability: Our door pullers feature a redesigned center support area with 8 additional supports to reinforce weak points prone to breakage
• Long-lasting solution: Prevent common breakage issues and ensure the longevity of your door pullers, outlasting the original equipment (OE) design
• Cost-effective repair: Avoid the need for expensive complete door panel replacements by repairing the weak areas with our reinforced door pullers
• Easy installation: Each puller comes with 5 screw holes for secure attachment, making installation straightforward and hassle-free
• Our commitment to you is total and we want you to always be 101% satisfied by the quality and efficiency of our service