80A Jewelry Spot Welder Machine Portable Spot Welding Machine Equipment, Portable Spot Welder with Foot Pedal for Jewelry Gold Silver Platinum K gold 110V 600W

Specifications:Material: Sheet MetalColor: BlueModel: 80AWelder Type: Electric Spot WelderPower: 600WPlug: US StandardWelding Range: 0.5-1.5mm/0.02-0.06inInput Voltage: 110 VProduct Size: 25.5*24.8*13cm/10*9.8*5.1inPacking Size: 37*28*18cm/14.56*11.02*7.08inGross Weight: 4.9kg/10.8lbsPackage Included:1 x Jewellery Spot Welding Machine1 x Power Cord1 x Foot Switch1 x Tungsten Needle1 x Fixture1 x Hand-held Welding G-u-ns1 x Pedestal1 x English ManualOther Accessories for UseNotes:1.Before using the welding machine, check whether the power supply meets the operating voltage. Connect the output wire of the welding machine to the screw of the corresponding pol-arity (tighten the nut when connecting the output wire to the output pol-arity).2.When working, clamp the workpiece with the fixture, close to the tungsten needle. Depending on the size and shape of the workpiece, generally, the distance between the tungsten needle and the workpiece is 0.007-0.04in. The disch-arge end of the tungsten needle must be sharp before and during use.3.Please do not put the welding machine in a damp place and keep it dry.4.Please don't step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.5.Strong lig-ht will be released during welding. Please wear protective glasses during welding and do not look directly at the welding part.6.When stepping on the foot switch, do not touch the metal part of the tungsten needle and the fixture at the same time, otherwise, there will be a feeling of acu-pun-cture.7.Non-professional personnel are not allowed to disassemble and repair. There is a high voltage inside.8.Please note that only 0.5-1.5mm diameter can be welded. Too thick or too thin can not be welded.9.Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.

• 【Product Parameter】This is jewelry spot welder machine, Material: Sheet Metal, Model: 80A, Power: 600W, Input Voltage: 110 V. Welding Range: 0.5-1.5mm/0.02-0.06in, Product Size: 25.5*24.8*13cm/10*9.8*5.1in. Gross Weight: 4.9kg/10.8lbs. The thickened sheet metal housing with painted finish is solid, wear-resistant, rust-proof, anti-cor-ros-ion, effectively protecting of internal components and extending the service life.
• 【Good Welding Effect】This 80A jewelry welder uses the principle of pla-sma high-frequency disch-arge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding.
• 【Intelligent Adjustment】According to the size of the workpiece, solder joint, and the process requirements, you can precisely adjust the output current through the coarse adjustment knob and the micro adjustment knob. Multiple cooling holes on the Spot welding machine ensure stable welding performance and prevent it from burning out after the long-term operation.
• 【Details Design】The precision of spot welding can be improved by controlling the welding time by foot switch to prevent interference with hand operation. The four anti-skid foot pads at the bottom realize stable placement during machine operation and prevent the table top from being scratched.
• 【Wide Application】It is lightweight, compact, and has a carrying handle on the top, making it convenient for you to carry when you go out to work. Jewelry welding machine can be used for the rapid welding of platinum, gold, K gold, silver, and steel. It is mainly used for welding the ring clasp of the jewelry. Workpieces such as metal plates and tubes cannot be welded.