45°Miter Clamp Countertop Seam Splicing Fixture for Granite Marble Stone Aluminum Alloy Install Tools for Degree Miter with High Efficiency

Clamp Countertop Seam Splicing Fixture, Tool Parts, ToolsName: Angle seam joint (45 degree clip)Material: Metal AlloyWeight: 1.55kgApplicable: Mainly used for artificial and natural tiles, or other similar degree splicesInstructions:1. Process the two workpieces into 45 bevels, then clean the 45-degree bevels assembled together, and assemble the two 45-degree workpieces at 90 degrees to each other, using a jig for plastic extrusion seams.2. Place the bottom of the wide stone on the work surface of the jig fitted with white rubber, and the side of the narrow stone close to the 90 inside the jig3. The two stapler levers can then be adjusted by: adjusting the spring mechanism to the top position of the workpiece, then turning the screw on the top of the stapler lever to apply pressure to hold the clamp in place for a certain amount of time until the workpiece is fully bonded , then loosen the clamp.

• Name: Angle seam joint (45 degree clip)
• Material: Metal Alloy
• Weight: 1.55kg
• Applicable: Mainly used for artificial and natural tiles, or other similar degree splices