440LB/200KG Pneumatic Punch Pressing Machine, Desktop Punching Pressing Machine Desktop Punching Pressing Machine

★Application：It is widely used in electronic components, instruments, toys, military, light industry, decoration, sheet metal processing, hardware tools, metallurgy, ships, automobiles, machinery, solar energy, and other industrial fields. It can be used for riveting and energizing, cutting, joint crimping, punching of non-ferrous metals, plastic parts, and so on.▶Height Adjustment：1. Loosen the two locking screws.2. Open the top screws and tighten them clockwise to separate the console from the column.3. Adjust the height by rotating the height adjusting the handle to the required height, then loosen the screws and tighten the fixing screws.▶Specifications：Material: Cast IronModel: 4V210-8Power Type: PneumaticAssembly Required: YesLayout Form: VerticalPedal Switch Model: TFS-1Current: 10AVoltage: 250VACVoltage Range: DC19.2-26.3VPower: DC24V 4.8WProtection: IP65Single Column: 200kg/440lbsWorkbench Area: 15*13.5cm/5.91*5.31inWorking Height: 20cm/7.87inCylinder Specification: 6.3*5-7.5cm/2.48*1.97-2.95inPunch Inner Hole: φ1.6cm/0.63inThroat Depth: 8cm/3.15inIntake Pipe: 0.8cm/0.315inOverall Pressure Range: 0.15-0.8MpaOperating Pressure: 0.4-0.7MpaPedal Switch Cord Length: 2m/6.56ftPower Cord Length: 1.5m/4.92ftPackage Size: 54cm*30.5cm*27cm/21*12*10inchGross Weight: 17kg/37.4lb▶Package Included：1* Pneumatic Punch Press Machine1* Air Handler1* English Instruction▶Notes：1. Please read the instructions carefully before use and pay attention to the safety matters inside.2. Please keep your hands out of the work area and please do not use a wrench to tighten the adjusting nut.

• 【Principle】The pneumatic punching machine is the high-pressure gas produced by the compressor, which is transported to the solenoid valve through the gas pipe. The working state of the cylinder is controlled by the movement of the solenoid valve through the switch, and the punching is completed.
• 【Dual Control Mode】This Pneumatic Punch Press adopts a microcomputer control mode, allowing you to freely choose manual, semi-automatic, and fully automatic operating modes.Hydraulic is helpful to reduce the noise generated by the electric standby machine, while saving electricity, and reducing production costs, and has a high cost-effective advantage.
• 【With foot switch】Die hole punches machine can be used with both hands on the control button or foot switch, increase protection devices, temperature control and pressure sensors, controls and pre-control devices comply with the safety standards to ensures the safety of operating personnel.
• 【Easy to Use】 pneumatic punch pressing machine, with a workforce of 440lbs/200kg and a table area of 5.91*5.31in. Easy adjustment of output, need to adjust the air pressure is adjustable up to the required pressure, high yield .Equipped with guide plate, high accuracy, can adapt to high speed precision impact load . According to different products or dies, adjust the speed, and the size of the pressure and stamping time.
• 【Application】The desktop punching pressing Suitable for electronics, electrical appliances, instruments, meters, cameras, watches, jewelry, hardware and garment, shoes and hats. Compressed air as power source, high efficiency and easy operating, can reduce labor, can be applied to manual operating integration, automated assembly line.