2 Pcs 3/4" NMO Adapter Connector Antenna Mounting Crimping Type, for RG58 Coxial Cable Repair Kit

Operation Steps: Pre-install: First, route the coaxial cable through the vehicle's mounting hole before assembling the NMO connector. Prepare components: Slide the heat shrink tube and metal compression sleeve onto the cable in order. Do it before stripping the cable to avoid the exposed braided material getting stuck in the sleev. Stripping: Strip 13mm of the outer insulation jacket and fold the braided shield back. Strip 6mm of the center conductor insulation. Tip: Temporarily secure the folded braid with electrical tape to prevent fraying. Crimping & Assembly: Insert the center conductor fully into the pin slot of the NMO connector. Slide the compression sleeve down to the base of the connector. Crimp the sleeve securely using the dedicated crimping tool. Sealing & Protection: Heat the shrink tubing until it completely wraps around the curled area, ensuring waterproof sealing.  Installation & Testing: Tighten the NMO base onto the vehicle mount. Reinstall the antenna. Use a multimeter to check for short circuits or open circuits. Recommended: Verify SWR (Standing Wave Ratio) is <1.5.  Performance Verification Verify using a Vector Network Analyzer (or at minimum a 50MHz oscilloscope): a) Signal attenuation ≤ 3dB/10m (at 144MHz VHF band) b) VSWR ≤ 1.8:1 (at 430MHz UHF band) Mechanical Test: Suspend a 5kg weight for 1 minute. Cable displacement should be <2mm.

• 3/4” holes NMO Mount Crimp Style for car antenna bracket, fits RG58 Coxial Cable
• Made of pure metal copper material, sturdy and durable, not easily worn out. It is also with stable signal and good conductivity
• Attach coaxial cable to turn it into a new 3/4 hole NMO antenna mount
• Ideal for repairing damaged mounts or assembling your own cable
• Applications Scenarios: vehicle antenna mounts repairment kit, connector crimp/solder for cable RG58