1L Chemistry Lab Glassware Distillation Kit with Cold Trap kit

This is a set of 24/40 glassware for distillation in lab. With a 14/20 joint to accept thermometers calibrated for 75mm immersion. The distributing adapter consists of a single 24/40 outer joint and three 24/40 inner joints to accept three 150mL Kjeldahl flask receivers. The receivers are held in place with plastic clamps. Including: 1.Distillation head, short path with 24/40 joint, with a 14/20 outer joint to accept thermometers calibrated for 75 mm immersion.one piece design for easy set up. with removable hose connector. 2.Distributing adapter, distillation receiver, with the24/40 outer and inner joints at 135 degree angle. with removable hose connector 3.Kjeldahl flask receivers with24/40 joint 3 pcs 4.1000mL 3 neck flask, heavy wall design, with 24/40 joint, 1 pcs. 5.plastic joint clip, 24/40, for standard taper joint.(Pack of 10) 6.thermometer adapter, 24/40 joint. 1pcs 7.thermometer adapter, 14/20 joint. 1pcs 8.65mm Outer diameter Cold Trap,24/40.1pcs 9.250ml receiving flask,24/40.1pcs 10.Bleeding tube.2pcs. 11.Penny-Head Hollow Glass Stopper.1pcs 12.Yellow back Thermometer.1pcs 13.All of the stands in the picture

• Customized would be availible
• Annealed at 800 degree Celsius
• Made of borosilicate glass 3.3
• Made by hand blowing